Display Driver Setup Fails for Intergraph G91 Video Adapter

 Last reviewed: June 6, 1995
Article ID: Q131142
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.51
  • Microsoft Windows NT Server version 3.51

SYMPTOMS

The installation of the Weitek Compatible Display Driver included in Windows NT version 3.51 fails for an Intergraph G91 video adapter on Intergraph TD-5 computers.

WORKAROUND

To work around this problem:

  • Use the video adapter driver shipped with the Intergraph computer or obtain the driver from Intergraph at (214) 669-9680.

    -OR-

  • Use the Weitek Compatible Display Driver included on the Windows NT Workstation 3.5 or Windows NT Server 3.5 compact disc. Run Control Panel, choose Display, and specify the I386 directory on the compact disc.

STATUS

Microsoft has confirmed this to be a problem in Windows NT version 3.51. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

KBCategory: kbdisplay kbbug3.51
KBSubcategory: ntdriver
Additional reference words: prodnt 3.51 display compact cd-rom

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: June 6, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.