Event ID 5012 When Using S3 864 Video Adapter

Last reviewed: November 14, 1997
Article ID: Q131143

The information in this article applies to:

Microsoft Windows NT Workstation version 3.51
Microsoft Windows NT Server version 3.51
Microsoft Windows NT Workstation version 4.0
Microsoft Windows NT Server version 4.0

SUMMARY

When you use an S3-864 video adapter with a hardware device, such as an IBM Token Ring 16/4 ISA network interface card (NIC), the NIC may fail and the following event log appears in the system log:

   Event ID: 5012
   Source: Ibmtok01
   Type: Error
   Description: The I/O base address supplied does not match the jumpers
   on the adapter.

CAUSE

The S3 video adapter is attempting to use the same address range as the hardware device. For example, by default, the S3 video adapter with the 864 chipset uses the RAM address range of C000 to CFFF. The IBM TokenRing 16/4 ISA NIC uses the address range of CC00 to CDFF, by default.

RESOLUTION

To correct this problem, change the RAM address of the hardware device to another address range, such as DC00.

Additional query words: prodnt 3.51 dell token ring
Keywords : ntconfig nthw kbdisplay kbhw
Version : 3.51
Platform : winnt

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 14, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.