Installing Windows NT on a NEC Versa P/75 (Enhanced IDE)

 Last reviewed: June 6, 1995
Article ID: Q131187
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5

SYMPTOMS

When you install Windows NT on an NEC Versa P/75 with an enhanced IDE drive, Setup may not be able to locate your hard drive.

CAUSE

This problem occurs because the machine BIOS does the logical block addressing (LBA), and the LBA is not initialized on new machines.

RESOLUTION

To correct this problem:

  1. Run the computer CMOS setup program and look at the drive parameters. There will be more than 1024 cylinders if it has an enhanced IDE drive.

  2. Save these settings. If you press escape, the parameters will not be saved and Windows NT will not install.

  3. Reboot the computer and install Windows NT.

KBCategory: kbsetup kb3rdparty kbhw
KBSubcategory: ntsetup
Additional reference words: 3.50 prodnt

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: June 6, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.