NetBIOS Error 0x11: Local Session Table FullLast reviewed: July 13, 1995Article ID: Q132501 |
The information in this article applies to:
SYMPTOMSWhen you run a NetBIOS application under Windows NT, the following error message appears:
Error 0x11 (Local session table full) Meaning: There are no available entries in the local session tableNOTE: The Windows NT Redirector (workstation service) and Server service do not use the NetBIOS Interface. For more information on standard NetBIOS error codes, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q126651 TITLE : NetBIOS Data Codes (Windows NT and RAS) CAUSEThis problem occurs when the NetBIOS application's request for number of sessions exceeds the configured session limit. The default session value is 16, the maximum session limit is 254.
RESOLUTIONTo correct this problem, increase the session limit using the NetBIOS Reset or DIR.OPEN.ADAPTER NetBIOS commands.
MORE INFORMATIONThe following table lists the default and maximum session settings for the NetBIOS interface implementation under Windows NT:
Maximum Lana 254 Maximum Sessions 254 Maximum Address 255 Maximum Names 253 Default Sessions 16 Default Commands 16 Default Names 8 |
KBCategory: kbnetwork
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |