Upgrading Windows NT Resets Boot Menu Timer

Last reviewed: August 4, 1995
Article ID: Q133408
The information in this article applies to:
  • Microsoft Windows NT Server versions 3.5 and 3.51
  • Microsoft Windows NT Workstation versions 3.5 and 3.51

SYMPTOMS

When you upgrade your Windows NT installation to a later version of Windows NT, your customized boot menu time-out period is reset to the default of 30 seconds.

WORKAROUND

To work around this problem, run Control Panel, choose System, and change the Show List For <> Seconds setting.

STATUS

Microsoft has confirmed this to be a problem in Windows NT versions 3.5 and 3.51. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.


KBCategory: kbenv kbbug3.51
KBSubcategory: ntui ntconfig
Additional reference words: prodnt 3.10 3.50 3.51 timer time out timeout


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: August 4, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.