How to Install CSNW or GSNW From Floppy Disks

Last reviewed: August 15, 1995
Article ID: Q134960

The information in this article applies to:

Microsoft Windows NT Workstation versions 3.5 and 3.51
Microsoft Windows NT Server versions 3.5 and 3.51

SUMMARY

This article describes how to create a floppy disk, from the original CD- ROM, to install Client Services for NetWare (CSNW) or Gateway Services for Netware (GSNW).

MORE INFORMATION

The following procedures require that NWLink is installed and configured correctly on the computers that you are going to install CSNW or GSNW on.

Client Services for NetWare

To create a floppy disk to install CSNW:

Create an \i386 subdirectory in the root directory of the floppy disk.
Copy CDROM.W from the root directory of the Windows NT CD-ROM to the root directory of the floppy disk.

Copy the following files from the \i386 directory on the Windows NT Workstation CD-ROM to the \i386 directory on the floppy disk:

      NWRDR.SY_
      NWAPI32.DL_
      NWCFG.DL_
      NETWARE.DR_
      NW16.EX_
      NWAPI16.DL_
      NWC.CP_
      NWDOC.CN_
      NWDOC.HL_
      NWEVENT.DL_
      NWWKS.DL_
      PERFNW.DL_
      VWIPXSPX.DL_
      VWIPXSPX.EX_

To install CSNW from the floppy disk:

Run Control Panel.
Choose Network.
Choose Add Software.
Select Client Services for NetWare and choose OK.
When you are prompted for a path, type the following and then press Enter:
```
      <drive>:\i386
```
where <drive> is the floppy disk drive containing the floppy disk you created.

Gateway Services for Netware

To create a floppy disk to install GSNW:

Create an \i386 subdirectory in the root directory of the floppy disk.
Copy all the files with a .S filename extension from the root directory of the Windows NT Workstation CD-ROM to the root directory of the floppy disk.

Copy the following files from the \i386 directory on the Windows NT Workstation CD-ROM to the \i386 directory on the floppy disk:

      NETWARE.DR_
      NW16.EX_
      NWAPI16.DL_
      NWAPI32.DL_
      NWC.CP_
      NWCFG.DL_
      NWDOCGW.CN_
      NWDOCGW.HL_
      NWEVENT.DL_
      NWRDR.SY_
      NWWKS.DL_
      PERFNW.DL_
      VWIPXSPX.DL_
      VWIPXSPX.EX_

To install GSNW from the floppy disk:

Run Control Panel.
Choose Network.
Choose Add Software.
Select Gateway Services for NetWare and choose OK.
When you are prompted for a path, type the following and then press Enter:
```
      <drive>:\i386
```
where <drive> is the floppy disk drive containing the floppy disk you created.

KBCategory: kbnetwork
KBSubcategory: nthowto
Additional reference words: 3.50 3.51 prodnt

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: August 15, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.