IGMP Group members Do Not Respond to IGMP Group Query FramesLast reviewed: August 25, 1995Article ID: Q135679 |
The information in this article applies to:
SYMPTOMSApplications that use IGMP correctly add Windows NT computers to a multicast group, but do not maintain membership to the multicast group.
CAUSEWindows NT does not respond to the multicast group query frames sent by the router to verify that there are still members in the group. If there are no other computers capable of responding to group query on that segment, the group is be disabled.
WORKAROUNDTo work around this problem, place a computer running Windows NT 3.51 or Windows for Workgroups and Microsoft TCP/IP-32a for Windows for Workgroups, version 3.11b or later, on the same segment. This computer will handle the group queries. You can resolve the problem by upgrading the computer running Windows NT 3.5 to Windows NT 3.51.
STATUSMicrosoft has confirmed this to be a problem in Windows NT version 3.5 This problem was corrected in Windows NT version 3.51.
|
KBCategory: kbnetwork kbbug3.50 kbfix3.51
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |