Supported Network Adapters Not Available in Remoteboot ManagerLast reviewed: September 7, 1995Article ID: Q136036 |
The information in this article applies to:
SYMPTOMSWhen you set up a profile in Remoteboot Manager (RPLMGR.EXE), some supported network adapters are not available. The supported network adapters for Remoteboot are listed on page 112 of the "Windows NT Server 3.5 (and 3.51) Installation Guides."
RESOLUTIONTo correct this problem, use the default profile in Remoteboot Manager if you are using any one of the supported network adapters listed below. The Remoteboot Service for Windows NT identifies the network adapter by its vendor ID and passes the correct network adapter driver to the computer. The following supported network adapters are not available for selection in Remoteboot Manager:
3Com TokenLink 3Com TokenLink III 3Com 3Station Madge Smart Ringnodes IBM Token Ring Novell NE1000NOTE: The Madge Smart Ringnodes network adapter is not listed in page 112 of the Windows NT Server Installation Guides, but is one of the supported network adapters for the Remoteboot service.
|
KBCategory: kbtool
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |