Using WINSCL.EXE

Last reviewed: September 11, 1997
Article ID: Q137582

The information in this article applies to:

Microsoft Windows NT Server versions 3.51 and 4.0

SUMMARY

Winscl.exe is a command line administrative tool for managing Windows Internet Name Service (WINS) servers. This tool is available in the Windows NT 3.51 and 4.0 Resource Kits. This article includes several tips for using Winscl.exe.

MORE INFORMATION

The WINS Server must be running to modify the WINS database with Winscl.exe.
WINSCL does not run under Windows NT 3.5.
You must have administrative permission to administer a WINS database. If you run WINSCL from an untrusted domain, you must have a user name and password that matches an administrative account on that domain.
WINSCL is case sensitive. The commands must be entered in upper-case, and NetBIOS names must match those that appear in the WINS database exactly.
Many commands give you a choice to enter 1 to select an option. You can enter 0 to choose the other option. For example, when you first start WINSCL you see:
```
      TCP/IP or named pipe. Enter 1 for TCP/IP --
```
You can enter 0 to select named pipe.
WINSCL may indicate that a command was successful, such as when you add or delete a WINS entry. You should Refresh and view the WINS database and verify that the command was carried out successfully. There is no indication when a command fails.
When removing WINS database entries, you must individually remove all the names that a computer may register. For example, a typical Windows client computer named "CHARLIE" would register three names, CHARLIE[00], CHARLIE[20], and CHARLIE[03]. To totally remove CHARLIE from the database, you must specifically remove all three names. The sixteenth character in the [] brackets is what differentiates the three names.

To use WINSCL to delete dynamic WINS entries, use the following steps:

Type the following command and then press Enter.
```
      WINSCL T
```
WINSCL prompts you for the IP address of the server running WINS.
Enter the WINS server's IP address and then press Enter.
Type the following command and then press Enter.
```
      DN <ComputerName>
```
where ComputerName is the name of the computer you wish to remove.
WINSCL prompts you to enter 1 to select a 16th character. Enter a 1 and the NetBIOS registration that you wish to remove. DO NOT include any backslashes ('\\'), enter only the NetBIOS name. Each registration must be removed separately.
Type the following command and then press Enter.
```
      1
```

5. Type the following command and then press Enter.

      1B

   WINSCL prompts you for a scope. Enter 0.

Type the following command and then press Enter.

The entry has been removed from the WINS database. Refresh the WINS manager and verify the entry has been deleted.

For more information on Winscl.exe, see the "Help for Windows NT Resource Kit Tools" or Winscl.txt in the Windows NT Resource Kit folder.

Additional query words: 3.51 4.00 prodnt
Keywords : nthowto ntreskit NTSrvWkst ntutil kbtool kbtool
Version : 3.51 4.0
Platform : winnt

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: September 11, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.