TN3270: Message Close Delay Option

 Last reviewed: November 7, 1997
Article ID: Q139500

The information in this article applies to:
  • Microsoft SNA Server versions 2.11 and 3.0

SUMMARY

The TN3270 Server Administration program in SNA Server 2.11 and the Settings tab of the TN3270 Server Properties in SNA Server 3.0 allow the administrator to configure the "Message Close Delay" timer. This timer is used to close the TCP/IP connection between the client and server. The more information section gives an example where this option can be used.

MORE INFORMATION

You can use the "Message Close Delay" timer to configure how quickly TN3270 disconnects clients that have failed to negotiate successfully with the TN3270 server, but have not yet closed their TCP/IP connection. This becomes important when you have hundreds of clients connecting and resources are limited.

NOTE: Some TN3270 emulators wait until the TN3270 server closes the connection before returning control to the application. When this happens users have to wait until this timer expires before they can do anything.

The following TN3270 server trace illustrates the default 10 second close delay timer. Note the 10 second time delay in handling the "Event=TEV_SessionTermination". For more information on TN3270 tracing refer to appendix B of the TN3270 Admin guide.

>10/19 10:29:37.676 (+ smidgen ) Event=TEV_TCPSendIssued 

 Thread = 0x00000128  Session = 0x001679E8  Socket = 0x00000080
 Number of bytes = 104
 000000  0d0a 544e 3332 3730 2053 6572 7669 6365  !..TN3270 Service!
 000010  2045 7272 6f72 2035 3131 0d0a 0d0a 5465  ! Error 511....Te!
 000020  6c6e 6574 206e 6567 6f74 6961 7469 6f6e  !lnet negotiation!
 000030  2066 6169 6c75 7265 3a20 2063 6c69 656e  ! failure:  clien!
 000040  7420 6469 6420 6e6f 7420 7365 6e64 2054  !t did not send T!
 000050  4e33 3237 3020 7465 726d 696e 616c 2074  !N3270 terminal t!
 000060  7970 652e 0d0a 0d0a                      !ype.....       !
>10/19 10:29:37.676 (+ smidgen ) Event=TEV_SessionTermination 
 Thread = 0x00000128  Session = 0x001679E8  Socket = 0x00000080
 Session waiting in termination state SESTERM_WaitingForMessageTimeOut
>10/19 10:29:37.676 (+ smidgen ) Event=TEV_TCPSendCompleted 
 Thread = 0x00000128  Session = 0x001679E8  Socket = 0x00000080
 Bytes transferred = 104
>10/19 10:29:47.690 (+ 10 secs ) Event=TEV_SessionTermination 
 Thread = 0x00000128  Session = 0x001679E8  Socket = 0x00000080
 Session terminated

Additional query words: prodsna
Keywords : snatn3270 kbinterop kbnetwork
Version : 2.11 3.0
Platform : winnt

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 7, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.