Using Intel NetportExpress XL Print Server with Windows NT

• Microsoft Windows NT Advanced Server version 3.1
• Microsoft Windows NT Server versions 3.5 and 3.51
• Microsoft Windows NT Server version 4.0

SUMMARY

When you migrate from a Novell Network to a Microsoft Network, you may have difficulty getting your Intel NetPortExpress XL print server to service print request, even if the Windows NT server is running File and Print Services for Netware (FPNW).

MORE INFORMATION

An Intel NetportExpress XL on a Novell Network is generally configured to use IPX/SPX. To use this print server on a Microsoft Network, it must be configured to support NetBIOS.

NOTE: For the NetportExpress XL to work on the Microsoft Network, the Application Code and RBL code must be version 3.04 or later.

For detailed information contact Intel FaxBack service at (800) 525-3019 and request Document 6072, or Intel technical support at (503) 264-7000.

After upgrading the NetPort software, you must configure the Windows NT server:

     1.    Create a user account and directory for the NETPORT.

     2.    Insure the Password is blank and that the "User Must Change
           Password at Next Logon" is NOT selected.

     3.    The account name should be NETPORT and the Shared directory
           should be NETPORT.

     4.    The NETPORT user account needs Read-Only access to the directory
           \NETPORT.

Complete the following steps for configuring the Netport with Netport Manager:

1. Start Netport Manager and select a NetportExpress print server from the list. Choose Configure.

1. If you are prompted, fill in the Set Remote Boot Load Servers window: If there are buttons for Server Type, select NetBIOS. Select a domain from the list, or type one in. Select a shared directory to connect to from the list, or type one in. The name must be in the form:

         \\<server_name>\<share_name>
   

   This should be the same as the user name of the account created on the Windows NT server. Choose OK.

   NOTE: There may be a delay while the NetportExpress updates its RBL information.

2. Choose Protocols, select Windows NT, Choose Configure (this is not available prior to version 3.04)

3. Fill in the "Configure Microsoft...Print Server Window". Choose Use Defaults to accept the default choices or select a domain for print services from the list (or type one in). For each port, enter a name and description.

4. If you want to use IP, Choose Set IP Address. Either select "Dynamically Configure" (requires DHCP), or fill the correct IP address information. Exit Netport Manager.

5. Now you can start Print Manager to create the printer. Make sure the share name is the same as the printer name.