Installing Windows NT 3.51 Service Pack 2 on Compaq Computers

 Last reviewed: June 18, 1996
Article ID: Q140040
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.51
  • Microsoft Windows NT Server version 3.51

After you install a Windows NT 3.51 Service Pack, you must choose Restart Computer to start the updated version of Windows NT 3.51. If you have a Compaq computer with Compaq Support Software Diskette (SSD) version 1.14 or greater, the following steps are recommended:

  1. Before you choose Restart Computer, press ALT+TAB to Program Manager.

  2. Run the Compaq SSD Setup program again. Make sure you look at NTREADME.HLP on the Compaq SSD CD-ROM disc.

  3. Press ALT+TAB to Windows NT Setup (Service Pack Setup) and choose Restart Computer.

The SSD is manufactured by Compaq, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

KBCategory: kbsetup
KBSubcategory: ntsetup
Additional reference words: prodnt 3.51

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: June 18, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.