The information in this article applies to:
- Microsoft Windows NT Workstation versions 3.5, 3.51 and 4.0
- Microsoft Windows NT Server versions 3.5, 3.51 and 4.0
SUMMARY
When you press the Print Screen key at the MS-DOS Command Prompt or in a
DOS application window under Windows NT, the screen contents are copied to
the clipboard. If you want to redirect the screen contents from a 16-bit
MS-DOS application to your printer, you must configure either the Program
Information File (PIF) file or the shortcut so that Windows NT ignores the
Print Screen key while the application is running.
MORE INFORMATION
To redirect the screen contents of a 16-bit MS-DOS application to your
Printer, perform the following steps:
Windows NT 3.51
- Run the PIF Editor (Pifedit.exe).
- For Program Filename, enter the full path of Command.com. For example:
%SystemRoot%\System32\Command.com
- Click Advanced.
- Select the PrtSc check box in Reserve Shortcut Keys, and then click OK.
- Click Windows NT.
- Make sure that the full path of the Config filename is correct. By
default, the full path is:
%SystemRoot%\System32\Config.nt
- Click OK.
- Save the PIF.
- Using a text editor, such as Notepad, add the following line to the
Config.nt file and save the file:
shell=%SystemRoot%\System32\Command.com
- Run the PIF.
NOTE: This procedure allows you send Print Screen contents to your printer
for all 16-bit MS-DOS applications. If you want this to work for one 16-bit
MS-DOS application, create another Config file and enter the full path of
the file in step 6 above. This works with Command.com and does not work
with Cmd.exe.
Windows NT 4.0
- Create a shortcut to the DOS application.
- Right-click on the shortcut, and then select Properties.
- Click the Misc tab.
- Click to clear the PrtSc check box.
- Click OK.
If you have a locally attached printer, you should now be able to launch
the DOS application using the shortcut and use the Print Screen key to
print locally. If you are using a network printer, you have to redirect the
printer output to the network printer using the following command at a
MS-DOS command prompt:
NET USE LPT1: \\<server>\<printer_sharename>
|