DHCP Server Shows Active Leases for Non-Existent RAS ServersLast reviewed: August 23, 1996Article ID: Q141184 |
The information in this article applies to:
SYMPTOMSA DHCP server has active leases for Remote Access Service (RAS) servers, but there are no RAS servers running on the network. NOTE: You can tell that the addresses are for RAS by the telephone icon in the active lease window.
CAUSEWhen the RAS servers configured to use TCP/IP were previously active, they received leased IP addresses from the Dynamic Host Configuration Protocol (DHCP) server. When the RAS servers were configured to only allow users to dial out those leased IP addresses were not deallocated by the DHCP server. There were Remote Access servers installed (configured to Receive calls and to dial-out) and configured for TCP/IP at one time, and they were allocated addresses by the DHCP server, but they were changed to dial-out only through the NCPA.
RESOLUTION
STATUSMicrosoft has confirmed this to be a problem in Windows NT version 3.51. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
|
KBCategory: kbnetwork
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |