Using the Adaptec 2940/2940 OU SCSI Controller with Windows NTLast reviewed: April 11, 1997Article ID: Q141185 |
The information in this article applies to:
SUMMARYWindows NT 3.50 and 3.51 are shipped with a driver for the Adaptec 2940 SCSI controller. The newer Adaptec 2940/2940 OU controller will not function with the shipped driver. This card is identified with the description Adaptec 2940/2940 OU on the component side of the board.
MORE INFORMATIONThe correct driver for this controller is available from the Adaptec BBS at (408) 945-7727. The file name is 7800WNT.EXE. It is a self-extracting zip file dated 6/12/96 and is 39,918 bytes. The driver file included is AIC78XX.SYS dated 4/12/96 and is 38,320 bytes. A README.TXT file is included with instructions for installing the driver. To install the driver during installation of Windows NT, bypass SCSI detection and use the driver provided by Adaptec. You can reach Adaptec Technical Support at (800) 959-7274.
|
Additional query words: prodnt 2940ou
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |