Obtaining Better Output with the Epson Stylus DriverLast reviewed: March 26, 1997Article ID: Q141517 |
The information in this article applies to:
The following information is provided by Epson of America. To obtain the best quality output support using the new updated Epson Stylus driver (Version 3.30), please use the following table to adjust the Gamma RGB values. The Recommended values are:
Resolution Paper Type Stylus COLOR Stylus Pro Stylus Pro XL ------------------------------------------------------------------- 360 Plain 1.0 1.0 1.0 360 Coated 360 dpi 1.0 1.0 1.0 360 Coated 720 dpi 1.5 1.5 1.5 720 Coated 720 dpi 1.0 0.7 0.7To make these modifications please do the following: The steps outlined are for permanent changes to the Gamma. If you desire to change it only on an as needed basis, then make your modifications from your Windows Application. [Per Job Modification] 1. Print Setup 2. Select Properties 3. Choose Halftone 4. Choose Input RGB Gamma 5. Make the modifications based on the table above. [Permanent Modification] 1. Highlight the Epson Stylus Series driver (Using PrintManager) 2. Select Properties from the Printer Menu 3. Choose Details, Job Defaults, Halftone 4. Choose Input RGB Gamma 5. Make the modifications based on the table above. The information included here is provided by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding the accuracy of the information or the output produced.
|
Additional query words: prodnt
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |