Weitekp9 Video Driver Collides with Media Vision Sound DriverLast reviewed: July 2, 1996Article ID: Q150553 |
The information in this article applies to:
SYMPTOMSWhen you try to use the Media Vision Proaudio Spectrum 16 driver (Mvaudio.sys) in conjunction with any of these Diamond Viper video cards:
Diamond Viper PCI Diamond Viper PRO PCI Diamond Viper PRO VLB Diamond Viper VLB Diamond Viper SE PCI Diamond Viper SE VLByou may receive a combination of the following event messages (the messages received depends on which driver was loaded first):
Event id: 22 source: Weitekp9 type: error Description: A conflict has been detected between two drivers which claimed two overlapping Io port regions. Driver weitekp9, with device <\Device\Video1.Translated>, claimed an IO port range with starting address in data address 0x28 and 0x2c, and length in data address 0x30. 0000: 000c0000 005e0003 00000000 c0040016 0010: 00000000 00000000 00000000 00000000 0020: 00000000 00000000 0000f000 00000000 0030: 00000c04 Eventid: 22 source: Weitekp9 type: error Description: A conflict has been detected between two drivers which claimed two overlapping Io port regions. Driver mvaudio, with device <\Device\PASWaveOut0.Translated>, claimed an IO port range with starting address in data address 0x28 and 0x2c, and length in data address 0x30. 0000: 000c0000 005e0003 00000000 c0040016 0010: 00000000 00000000 00000000 00000000 0020: 00000000 00000000 0000f388 00000000 0030: 00000004 Event id: 22 source: mvaudio type: error Description: The description for Event ID (22) in Source ( mvaudio ) could not be found. It contains the following insertion string(s): , weitekp9, \Device\Video0.Translated. 0000: 000c0000 005c0003 00000000 c0040016 0010: 00000000 00000000 00000000 00000000 0020: 00000000 00000000 0000f000 00000000 0030: 00001000 Event id: 22 source: mvaudio type: error Description: The description for Event ID (22) in Source ( mvaudio ) could not be found. It contains the following insertion string(s): , mvaudio, \Device\PASWaveOut0.Translated. 0000: 000c0000 005c0003 00000000 c0040016 0010: 00000000 00000000 00000000 00000000 0020: 00000000 00000000 0000f388 00000000 0030: 00000004 Event id: 7000 source: Service control manager type: error Description: The mvaudio service failed to start due to the following error: The parameter is incorrect. CAUSEAll of the Diamond Viper video cards listed above use the Weitekp9 video chip set. The Weitekp9.sys and the Mvaudio.sys drivers try to use overlapping I/O resources.
RESOLUTIONReplace the Weitekp9-based video card with another video card that is on the Hardware Compatibility List (HCL) but doesn't use the Weitekp9 chip set.
STATUSMicrosoft has confirmed this to be a problem in Windows NT versions 3.5 and 3.51. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.
|
KBCategory:
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |