Unable to Connect to a Lotus Notes Server Over RouterLast reviewed: July 2, 1996Article ID: Q150832 |
The information in this article applies to:
SYMPTOMSA Lotus Notes client on a Windows NT or Windows 95 computer using NetBIOS and NWLink on Token Ring may fail to connect to a Lotus Notes server on Ethernet. This symptom can also occur when a Notes client is on a FDDI ring.
CAUSEThe network adapter on one side of the conversation is on a link that has a larger frame size than the link on the other side, and IPX does not do fragmentation. According to the IPX specification, it is up to a higher level to determine the maximum transmit unit (MTU). For NetBIOS traffic over IPX there is no MTU negotiation scheme.
WORKAROUNDTo work around this problem, decrease the frame size of the Token Ring network adapter to 1,012 bytes on the Windows NT computer. WARNING: Using Registry Editor incorrectly can cause serious, system- wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.
1. Run Registry Editor (REGEDT32.EXE). 2. From the HKEY_LOCAL_MACHINE subtree, go to the following key: \SYSTEM\CURRENTCONTROLSET\SERVICES\NWRDR\PARAMETERS 3. Set DefaultMaxPacketSize (reg_dword), to 1012 (decimal).For additional information about configuring Lotus Notes clients on Windows, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q104944 TITLE : Configuring Lotus Notes Client on Windows NT Using NWLINK |
KBCategory: kb3rdparty kbinterop
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |