Error 692 Using 3Com Impact ISDN Modem with RASLast reviewed: September 3, 1997Article ID: Q151232 |
The information in this article applies to:
SYMPTOMSWhen you use Remote Access Service (RAS) and attempt to dial out with your 3Com Impact modem, you receive the following error message:
Error 692: Hardware failure in port or attached device.NOTE: You can use one of 3Com's line of Impact ISDN modems with Windows NT Remote Access Service (RAS) after you obtain a Modem.inf file from 3Com. These devices are not listed on the current Windows NT Hardware Compatibility List (HCL).
CAUSEThe <autodial> macro specified in the COMMAND_DIAL line of the 3Com Impact Digital Data section of 3Com's Modem.inf file is not resolved properly.
RESOLUTIONEdit the 3Com Impact Digital Data section of the Modem.inf file supplied by 3Com. Change the following line
COMMAND_DIAL=<autodial><phonenumber><cr>to:
COMMAND_DIAL=ATD <phonenumber><cr>You must restart RAS in order for this change to take effect. The 3Com Impact modem is manufactured by 3Com, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
|
Additional reference words: prodnt 3.50 3.51 3c861 3c862
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |