Driver for Use with Wangtek 5100 Tape Drive

Last reviewed: September 9, 1996
Article ID: Q153232

The information in this article applies to:

Microsoft Windows NT Workstation versions 3.5 and 3.51
Microsoft Windows NT Server versions 3.5 and 3.51

SUMMARY

Windows NT does not provide direct support for the Wangtek 5100 tape drive but it may be possible to use the device with drivers for other Wangtek units.

MORE INFORMATION

The driver to use is the Wangtek 525, 250, 9500 driver. This can be added from Windows NT Setup add/remove tape devices.

For additional information on the use of the Wangtek 5100 with Windows NT, it is necessary to call Wangtek technical support at (800) 992-9916.

The Wangtek 5100 tape drive is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

The third-party contact information included in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Microsoft in no way guarantees the accuracy of this third-party contact information.

KBCategory: kb3rdparty
KBSubcategory: ntbackup
Additional reference words: 3.50 3.51 prodnt ntbackup

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: September 9, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.