Compaq NetFlex-3/E Controller not Upgraded During WinNT 4.0 SetuLast reviewed: October 31, 1997Article ID: Q153589 |
The information in this article applies to:
SYMPTOMSDuring the Windows NT 4.0 upgrade, the Network Wizard states that the Compaq NetFlex-3/E Controller is being upgraded. After the upgrade process is finished, however, the driver is not upgraded and the Network Setup Warning fails to appear and warn you to upgrade the driver.
More InformationThe adapters in the DRVLIB subdirectory of the Windows NT 4.0 Installation compact disc are supposed to display a warning similar to the following:
Network Setup Warning
The following software needs to be updated to run with this version
Windows NT: Intel EtherExpress Pro Ethernet Adapter Driver. If you have
an updated version of the software, please upgrade following the
instructions supplied with the software. Otherwise, please contact
Microsoft for more information.
RESOLUTIONUpdate the Compaq NetFlex-3/E Controller card manually. To update the driver for this card, install the latest driver from the COMPAQ SSD:
STATUSMicrosoft has confirmed this to be a problem in Windows NT version 4.0. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available. Keywords : kbbug4.00 nthw ntsetup NTSrvWkst kb3rdparty kbhw kbnetwork Version : WinNT:4.0 Platform : winnt Issue type : kbprb Solution Type : kbworkaround |
================================================================================
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |