Changing the Root Directory for Windows NT

 Last reviewed: April 10, 1997
Article ID: Q154129
The information in this article applies to:
  • Microsoft Windows NT Workstation versions 3.5 and 3.51
  • Microsoft Windows NT Server versions 3.5 and 3.51

SUMMARY

This is an informational article on how to change the directory name of Microsoft Windows NT after it is installed. This could be desirable when, for example, users who have upgraded from Windows NT 3.1 to Windows NT 3.5 wish to change the directory name to reflect the current Microsoft Windows NT version.

NOTE: Microsoft does not support the method described in this article. The supported method is to reinstall Microsoft Windows NT into the appropriate directory. Also note that third-party applications that do not use the Microsoft Windows NT System_Root Flag may also have to be reinstalled.

MORE INFORMATION

There are two methods, one for systems in which the Windows NT system root is on a hard disk drive partitioned with Windows NT File System (NTFS) and one for those where the system root is on a FAT partition.

Here is the method for systems with NTFS: 

   1. Install a parallel copy of Windows NT in a temporary directory.
2. When you start the computer, select the new install of Microsoft Windows NT. 3. Log on and open File Manager, then select the Windows NT directory you wish to rename. 4. From the Options menu at the top of File Manager, click File, and then click Rename. 5. From File Manager, select the Boot drive. 6. From the Options menu, click View, then click By File Type and select the Show Hidden/System Files check box. 7. Highlight the Boot.ini file in the root directory and click File from the Options tool bar. 8. Select Properties then click to clear the Read Only and System attributes check boxes. Click OK. 9. Open Boot.ini with Notepad.exe for editing. 

   NOTE: Changing the directory name should automatically change the
   directory name in the Boot.ini file unless it is the default
   entry. Check the Boot.ini file to make sure the correct directory
   names are being used.

   10. Change the Winnt_Root directory pointer in the following places:
***This is an example of Boot.ini***

[boot loader] default=multi(0)disk(0)rdisk(0)partition(2)\winnt_temp (*Ensure disk and partition information is correct*)

[operating systems] multi(0)disk(0)rdisk(0)partition(2)\winnt_temp="Windows NT Server Version 3.51" multi(0)disk(0)rdisk(0)partition(2)\winnt_temp="Windows NT Server Version 3.51" /basevideo /sos multi(0)disk(0)rdisk(0)partition(2)\WINNT_351="Windows NT Server Version 3.51" multi(0)disk(0)rdisk(0)partition(2)\WINNT_351="Windows NT Server Version 3.51" /basevideo /sos 

   In this example, WINNT_TEMP is the directory into which the
   parallel copy of Windows NT was installed. WINNT_351 is the
   renamed directory.

   You can delete the lines that point to the temporary directory
   of Windows NT you just installed, except in the Default line.
   The directory at the end of this line must reflect the new Windows NT
   directory name.

   To conclude the process, open the Options menu, click File, then click
   Save. Now click Yes to replace the file Boot.ini. Restart your computer.
Here is the method to use for systems with FAT: 

   NOTE: You will not need to install a second copy of Windows NT
   to make this directory change.

   1. From File Manager, change only the attributes for Boot.ini from the
     Properties window as in the directions above. Do not edit Boot.ini
     at this point.
   2. Ensure that you have a bootable DOS floppy disk with a DOS editor and
     the Move or Xcopy commands. (If you have a third-party utility that
will 
     allow you to change directory names, this can be substituted for the
Move 
     and/or Xcopy commands.)
3. Boot your computer from the bootable DOS disk. 4. From the prompt, create the new directory you wish to use (for example, MD WINNT351). 5. Use the Move or Xcopy command to move the Windows NT directory, its files, and its subdirectories to the new directory. 6. Edit the Boot.ini file with an editor following the instructions from above. (NOTE: Since you did not have to install a second copy of Microsoft Windows NT as was true on the NTFS volume, you will not have any entries for a temporary directory.) 7. After saving the new Boot.ini file, remove the system disk and restart the computer.

In addition to the preceeding steps all references to the Windows NT directory in the setup.log file in the repair directory and on the emergency repair disk must also be modified in order for repair to work. For example:

[Paths] TargetDirectory = "\WINNT35"

[Files.WinNt] \WINNT35\System32\EEPRO.HLP = "EEPRO.HLP","c56a","\epro","Intel EtherExpress PRO Driver Disk","(null)"

Additional query words:
Keywords : kbusage ntsetup
Version : 3.5 3.51
Platform : WinNT

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: April 10, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.