Quantum DLT 2000 and 4000 Tape Device SupportLast reviewed: August 13, 1997Article ID: Q154734 |
3.5 3.51
WINDOWS
kbsetup
The information in this article applies to:
SUMMARYThe Quantum DLT 2000 and the DLT 4000 Tape Drives are not on the current Windows NT Hardware Compatibility List at the time this article was written. Certified driver support is not available at this time.
MORE INFORMATIONThe DLT 2000 and DLT 4000 can use the Dlttape.sys driver that is supplied with Windows NT 3.51 Service Pack 4. To install the DLT tape driver:
device.7. Install Windows NT 3.51 Service Pack 4. 8. On restart, the DLTTAPE driver should be started. To verify, check DLTTAPE from the Devices applet in the Control Panel.9. If the driver is started, test the DLT drive with Windows NT Backup.
ADDITIONAL INFORMAIONThe Quantum DLT 2000 and DLT 4000 tape drives are not directly supported by Microsoft Windows NT Version 3.51. The Quantum products included here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
http://www.quantum.com |
KBCategory: kbsetup
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |