Non-SCSI Devices Added Using SCSI Adapters Tool

 Last reviewed: March 27, 1997
Article ID: Q155925
The information in this article applies to:
  • Microsoft Windows NT Server version 4.0
  • Microsoft Windows NT Workstation version 4.0

SYMPTOMS

When you are trying to add a driver for a non-SCSI storage device (for example, an IDE or proprietary-interface CD-ROM drive), there is no apparent way to add it.

CAUSE

Non-SCSI storage devices such as ATAPI CD-ROM drives and proprietary- interface CD-ROM drives (such as those by Panasonic, Sony, and Mitsumi) are added using the SCSI Adapters tool.

RESOLUTION

Use the SCSI Adapters tool in Control Panel to add drivers for these devices.

Additional query words: prodnt pci cdrom atdisk
Keywords : kbenv kbhw kbui nthw NTSrvWkst ntui
Version : 4.0
Platform : WinNT

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 27, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.