STOP: 0x0000001E with HP DeskScan Version 2.3

 Last reviewed: February 23, 1998
Article ID: Q156325
The information in this article applies to:
  • Microsoft Windows NT Server version 4.0
  • Microsoft Windows NT Workstation version 4.0

SYMPTOMS

When you attempt to use the Hewlett-Packard (HP) DeskScan software version 2.3 in Windows NT version 4.0, you may receive the following error message: 

   STOP: 0x0000001E - aspi32.sys
   Unhandled kernel exception

CAUSE

HP DeskScan version 2.3.x does not function properly in Windows NT version 4.0. This is because DeskScan 2.3.x uses an ASPI driver to control an HP ScanJet scanner. DeskScan 2.2 does not rely on an ASPI driver and functions properly under both Windows NT 3.5x and Windows NT 4.0.

NOTE: The Aspi32.sys driver included with DeskScan 2.3.x will work properly only under Windows NT 3.51.

RESOLUTION

Using DeskScan 2.2 - does not require an ASPI driver

To use HP DeskScan software on Windows NT version 4.0, obtain version 2.2 of the software from HP's web site. DeskScan 2.2 requires that a directory called "Disk1" be created first and then the self-extracting file should be executed from within this directory. Then follow the installation instructions in both the Readme.nt and Readme.wri files that appear in the Disk1 directory.

OR

Using DeskScan 2.3.x - requires an ASPI driver

To use HP DeskScan software on Windows NT version 4.0, obtain version 2.3.x of the software from HP's web site and follow the installation instructions in both the Readme.nt and Readme.wri files that appear in the Disk1 directory when the self- extracting file is run. Also, it is important that an updated Aspi32.sys driver be obtained for the SCSI controller used with your system if this software is intended to be used with Windows NT version 4.0. The Aspi32.sys included with DeskScan 2.3.x will only work with Windows NT 3.51.

MORE INFORMATION

If you have an Adaptec SCSI controller, you can contact Adaptec for an updated Aspi32.sys driver. For all other SCSI controllers, including the HP supplied SCSI controllers, contact your SCSI controller manufacturer or Adaptec for information on obtaining an updated Aspi32.sys driver. For information about how to contact the manufacturers listed above, query in the Knowledge Base for one of the following articles: 

   ARTICLE-ID: Q65416
   TITLE     : Hardware and Software Third-Party Vendor Contact List, A-K

   ARTICLE-ID: ID: Q60781
   TITLE     : Hardware and Software Third-Party Vendor Contact List, L-P

   ARTICLE-ID: Q60782
   TITLE     : Hardware and Software Third-Party Vendor Contact List, Q-Z
The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Additional query words: prodnt blue screen dump scanner scsi
Keywords : ntprint NTSrvWkst ntstop kb3rdparty kbprint
Version : 4.0
Platform : winnt
Issue type : kberrmsg
Solution Type : kbworkaround

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: February 23, 1998
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.