"STOP: 0x00000093" with Novell NetWare Client Services

 Last reviewed: February 20, 1998
Article ID: Q156527
The information in this article applies to:
  • Microsoft Windows NT Server version 4.0
  • Microsoft Windows NT Workstation version 4.0

SYMPTOMS

After you install the Novell NetWare Client Service version 3.5b in Windows NT 4.0, you may receive the following error message: 

   STOP: 0x00000093
   INVALID_KERNEL_HANDLE
You may also receive this message after upgrading from Windows NT 3.5x to Windows NT 4.0 if the NetWare Client Service was not removed before the upgrade.

CAUSE

The Novell NetWare Client Service version 3.5b for Windows NT 3.5x is not compatible with Windows NT 4.0. The Windows NT 4.0 upgrade process is unable to upgrade the Novell components.

RESOLUTION

To resolve this issue, rename the Nwfs.sys file using the steps in the appropriate section below.

Windows NT Installed on a FAT Partition

  1. Start your computer using the MS-DOS option from the NT OS Loader. (If MS-DOS is not an option, boot your computer using an MS-DOS boot disk.)

  2. Change directories to the Winnt\System32\Netware folder.

  3. Rename the Nwfs.sys file to Nwfs.old.

  4. Restart your computer and start Windows NT.

Windows NT Installed on an NTFS Partition

  1. You can remove all the network cards from your machine, This will prevent the network components from starting and allow you to logon without trapping. If this does not work then you must install a parallel copy of Windows NT and follow the remaining steps below.

  2. Log in to the new installation of Windows NT and run Command Prompt.

  3. Change directories to the Winnt\System32\Netware folder on the original Windows NT installation.

  4. Rename the Nwfs.sys file to Nwfs.old.

  5. Restart the original installation of Windows NT.

NOTE: The NetWare Client Service is unable to start without the Nwfs.sys file and may generate event log errors. After logging into Windows NT, you should completely remove the Novell NetWare Client Service using the following steps:

1 In Control Panel, double-click Network.

  1. Click the Services tab, click Novell NetWare Client Services, and then click Remove.

  2. Click OK. When you are prompted to restart the computer, do so.

After you have removed the Novell NetWare Client Service, use one of the following methods to gain access to NetWare resources on the network:
  • Install the Gateway Service for NetWare or the Client Service for NetWare that is included with Windows NT Server or Windows NT Workstation.
  • Contact Novell Technical Support to obtain an updated client for Windows NT 4.0.

MORE INFORMATION

The Novell NetWare Client Service is used with Windows NT 3.5x to access NDS (NetWare Directory Services) objects in a Novell 4.x tree. Windows NT 4.0 includes a client for NetWare that allows access to NDS objects, but does not allow certain Novell tools to operate in Windows NT.

For additional information, please see the following article in the Microsoft Knowledge Base: 

   ARTICLE-ID: Q149014
   TITLE     : Unable to Run Netadmin.exe or Nwadmin.exe

Additional query words: 4.00 93 0x93 novell client
Keywords : ntstop kbnetwork kbsetup kbfaq
Version : 4.0
Platform : winnt
Issue type : kberrmsg

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: February 20, 1998
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.