Event ID 5721 After Deleting Computer Account

• Microsoft Windows NT Workstation versions 3.5, 3.51, and 4.0
• Microsoft Windows NT Server versions 3.5, 3.51, and 4.0

SYMPTOMS

You may have problems logging on to your Windows NT domain from a Windows NT Workstation or Server computer that is a member of a domain and receive the following logon message:

   The system cannot log you on to this domain because the system's
   computer account in its primary domain is missing or the password on
   that account is incorrect.

   Event ID 5721:
   The session setup to the Windows NT Domain Controller <Unknown> for the
   domain <Domain Name> failed because the Windows NT Domain Controller
   does not have an account for the computer <computername>.

CAUSE

The Netlogon service may fail to start and Event 5721 will be logged if one of the following conditions are true:

1. The computer account has been removed.

2. The computer name has been changed

3. The computer account password has changed because another Windows NT system with the same computername has joined the domain.

4. The domain is not synchronized.

RESOLUTION

You should first verify that an account has been created in Server Manager for the computer. You can do this by select "Show Domain Members" from the View menu. If an account does not exist start from Step 3, below.

You should also verify that domain synchronization is successful. For more information, please refer to the following Microsoft Knowledge Base article:

   ARTICLE-ID: Q149664
   TITLE     : Verifying Domain Netlogon Synchronization

If you cannot log on to the domain, you can log on to the local computer by selecting the local computer name in the From field and specifying a local user name and password. To do this, perform the following steps:

1. From Server Manager, select the computer name from the list of computers in the domain.

2. From the Computer menu, select Remove from Domain and click Yes when prompted to confirm the removal.

3. From the Computer menu, select Add to Domain.

4. Select Windows NT Workstation or Server, type the appropriate computer name, and then click the Add button.

5. Click the Close button.

6. Select the primary domain controller (PDC) from the list of computers in the domain.

7. From the Computer menu, select Synchronize the Entire Domain.

8. Click Yes twice.

9. Click the OK button.

10. From the Windows NT Workstation or Server computer, double-click the

        Control Panel Network icon.
    

11. Click Change.

12. Select Workgroup, and then click OK.

13. Click Yes, then click OK twice.

14. Click Restart Now.

15. After the computer has restarted, log on as an administrator

        of the local computer, by selecting the computer name in the From
        Field.
    

16. From the Control Panel Network tool, click Change next to the

        Workgroup name.
    

17. Select Domain and type the appropriate domain name.

18. Click OK, then click Yes.

19. Click OK twice.

20. Click Restart Now.

The above instructions do not apply to Backup Domain Controllers (BDC). For related information on BDCs, please refer to the following Microsoft Knowledge Base article:

   ARTICLE-ID: Q153719
   TITLE     : How to Re-Sync PDC/BDC Trust After Event IDs 3210 and 7023