SCSISCAN Does Not Detect Multiple Scanners

 Last reviewed: March 28, 1997
Article ID: Q162186
The information in this article applies to:
  • Microsoft Windows NT Server versions 3.51, 4.0
  • Microsoft Windows NT Workstation versions 3.51, 4.0

SYMPTOMS

On a computer with multiple SCSI host adapters and multiple SCSI scanners, Windows NT does not correctly detect multiple scanners.

CAUSE

This is a known problem with SCSISCAN. It does not correctly enumerate multiple SCSI host scanners.

STATUS

Microsoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

Additional query words: prodnt
Keywords : kbhw ntsetup
Version : 3.51 4.0
Platform : WinNT

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 28, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.