How to Install CSNW or GSNW from Floppy Disks for Windows NT 4.0

Last reviewed: March 28, 1997
Article ID: Q162565

The information in this article applies to:

Microsoft Windows NT Workstation version 4.0
Microsoft Windows NT Server version 4.0

SUMMARY

This article describes how to create a floppy disk from the original compact disc to install Client Services for NetWare (CSNW) or Gateway Services for NetWare (GSNW) for Windows NT 4.0.

MORE INFORMATION

The following procedures require that NWLink is installed and configured correctly on the computers on which you are going to install CSNW or GSNW.

Client Services for NetWare

To create a floppy disk to install CSNW:

Create an \i386 subdirectory in the root directory of the floppy disk.
Copy Cdrom_W.40 from the root directory of the Windows NT compact disc to the root directory of the floppy disk.

Copy the following files from the \i386 directory on the Windows NT Workstation compact disc to the \i386 directory on the floppy disk:

      Netware.dr_
      Nw16.ex_
      Nwapi16.dl_
      Nwapi32.dl_
      Nwc.cp_
      Nwcfg.dl_
      Nwdoc.cn_
      Nwdoc.hl_
      nwevent.dl_
      Nwrdr.sy_
      Nwscript.ex_
      Nwwks.dl_
      Perfnw.dl_
      Vwipxspx.dl_
      Vwipxspx.ex_

To install CSNW from the floppy disk:

Run Control Panel.
Choose Network.
Choose Services.
Choose Add.
Select Client Services for NetWare and choose OK.
When you are prompted for a path, type the following and then press Enter:
```
      <drive>:\i386
```
where <drive> is the floppy disk drive containing the floppy disk you created.

Gateway Services for NetWare

To create a floppy disk to install GSNW:

Create an \i386 subdirectory in the root directory of the floppy disk.
Copy the file Cdrom_s.40 from the Windows NT Server compact disc root

directory to the root directory of the floppy disk.

Copy the following files from the \i386 directory on the Windows NT Workstation compact disc to the \i386 directory on the floppy disk:

      Netware.dr_
      Nw16.ex_
      Nwapi16.dl_
      Nwapi32.dl_
      Nwc.cp_
      Nwcfg.dl_
      Nwdocgw.cn_
      Nwdocgw.hl_
      Nwevent.dl_
      Nwrdr.sy_
      Nwscript.ex_
      Nwwks.dl_
      Perfnw.dl_
      Vwipxspx.dl_
      Vwipxspx.ex_

To install GSNW from the floppy disk:

Run Control Panel.
Choose Network.
Choose Services.
Choose Add.
Select Gateway (and Client) Services for NetWare and choose OK.
When you are prompted for a path, type the following and then press Enter:
```
      <drive>:\i386
```
where <drive> is the floppy disk drive containing the floppy disk you created.

For instructions on installing to Windows NT 3.51, please see the following article in the Microsoft Knowledge Base:

   ARTICLE-ID: Q134960
   TITLE     : How to Install CSNW or GSNW from Floppy Disks

Additional query words:
Keywords : kbnetwork nthowto NTSrvWkst
Version : 4.0
Platform : WinNT

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 28, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.