DEC Celebris 590 with Buslogic KT-946C May HangLast reviewed: December 18, 1997Article ID: Q164664 |
The information in this article applies to:
SYMPTOMSAfter you apply Windows NT 4.0 Service Pack 2 on a DEC Celebris 590 with buslogic KT-946C, the computer appears to stop responding when restarted.
CAUSEA problem in Atapi.sys driver was causing other peripheral component interface (PCI) devices to not respond as expected after enumerating the PCI bus (how they do not respond as expected depends on the device.)
STATUSMicrosoft has confirmed this to be a problem in Windows NT version 4.00. A supported fix is now available, but has not been fully regression tested and should be applied only to systems experiencing this specific problem. Unless you are severely impacted by this specific problem, Microsoft recommends that you wait for the next Service Pack that contains this fix. Contact Microsoft Technical Support for more information. Keywords : kbbug4.00 kbfix4.00 NTSrvWkst Version : WinNT:4.0 Platform : winnt Hardware : x86 Issue type : kbbug Solution Type : kbfix |
================================================================================
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |