How to Demote to BDC When Two PDCs PresentLast reviewed: November 20, 1997Article ID: Q167248 |
The information in this article applies to:
SUMMARYIf a primary domain controller (PDC) is unavailable or needs to be taken offline, a backup domain controller (BDC) can be promoted in its place. This should only be done when the PDC is expected to be down for a long period of time because the automatic demotion of the original PDC to BDC will not occur. In many circumstances, it is fine to be without a PDC for a short time. However, if User Manager is needed, or if a user needs to change his or her password, there must be a PDC present.
MORE INFORMATION
Promote BDC to PDCWith the primary domain controller offline or gracefully shut down and turned off, in Server Manager, promote one of the backup domain controllers. Because the primary domain controller is offline, you will receive the following warning:
Server Manager cannot find the Primary Domain Controller for <DomainName>. You may administer the domain, but certain domain-wide operations will be disabled.To see a list of the backup domain controllers in your domain, verify that the check box is cleared next to the entry "Show Domain Members only" under the View menu. With this check box cleared, the list presented in Server Manager is provided by the browser service. When the check box is selected, the PDC's user account database (SAM) is queried for all Windows NT-based workstations, servers, and domain controllers that have a computer account in that domain. The following key in the registry is parsed:
HKEY_LOCAL_MACHINE\SAM\SAM\Domains\Account\Users\Names\<ComputerName$>Select the backup domain controller you want to promote, and under the View menu, select Promote to Primary Domain Controller.
Demote PDC to BDCWhenever domain administration tools are used, the changes or additions occur at the PDC. When domain synchronization occurs, these changes or deltas are sent from the PDC to the BDC using this one-way replication. Because a "stand-in" PDC was necessary while the "original" PDC was offline, changes have probably been made to the database on the stand-in computer; it will be important for it to remain the PDC while the original PDC is demoted. Successfully demoting the original PDC will also cause a synchronization with the stand-in PDC, giving it the recent changes done during its absence. Later, the original PDC can once again resume the role of PDC for the domain by simply promoting it in Server Manager. To demote the original PDC just brought back online, use Server Manager. Under the View menu, clear the check box next to "Show domain members only." This allows a browse list to inform Server Manager that the computer is configured as a PDC, and will allow it to be demoted. Select the original PDC, and select "Demote to backup domain controller" under the Computer menu. The following is further explanation of the browser information in Server Manager: Check mark next to "Show domain Members Only" (no browser information):
COMPUTER TYPE PDC icon (available) Stand-In Windows NT Primary BDC icon (dimmed) Original Windows NT BackupNo check mark next to "Show domain Members Only" (with browser information):
COMPUTER TYPE PDC icon (available) Stand-In Windows NT <version> Primary PDC icon (dimmed) Original Windows NT <version> PrimaryWith the browser information, Server Manager allows the original PDC to be selected and demoted by choosing "Demote to Backup Domain Controller." Without the browser information, Server Manager is just looking at the current PDC's registry, and there is no option to demote the PDC. It is considered a backup because the registry does not contain the role of all other domain controllers in the domain. Only its own role is maintained. The icon and type conventions in Server Manager when browsing information is introduced are altered when two PDCs are in one domain. With no browser information, all of the icons are dimmed except for the PDC, because that is the only computer Server Manager knows is up and running. Also note that the original PDC has the icon of a BDC, and the Type is Backup. With no other information other than the SAM on the PDC, all other domain controllers are BDCs in a usual environment. When browser information is integrated into the domain list in Server Manager, the icons can be available because there is a mechanism to determine if the computers are currently running in the domain. In addition, Windows NT version information can be included. Also, Windows for Workgroups computers that have their workgroup name set to that of the domain name will appear in the list. Notice that the original PDC’s icon is dimmed and the Type has changed from Backup to Primary. This is because having more than one PDC in a domain violates domain rules, and now the browser information is parsed, and the intended role of the computer can be determined.
Two PDCs Active at the Same TimeIt may be possible for more than one PDC to be active in a domain at the same time. This may cause serious problems, but can be the result of several things. If a network connection such as a router or cable fails, and during this failure a BDC was promoted, when the failure is resolved, two PDCs will be active in the domain. Because both are already running, the Netlogon service does not have the chance of detecting another PDC at startup time and fails to start. Some other reasons for having more than one PDC active would be because there is a very slow WAN link, the WINS databases are out of sync, not configured as push or pull partners, or replicating too slowly. When there are two PDCs active at the same time, when it comes time to resolving the situation, a decision must be made as to which changes that potentially were made to each User Account database using the Administrator tools must be lost. Because domain synchronization is a one- way replication from the PDC to BDC, there is no merging or time-stamp method for resolving the differences. In addition to running User Manager on each PDC to determine what accounts it has, you can type NET USER at the command prompt. You can choose whichever PDC to demote by having its Netlogon service "collide" with the other PDC's Netlogon service. The first computer to successfully start the Netlogon service and browser service, will remain the PDC. The second PDC that starts and has its Netlogon service fail to start can be demoted.
Use NET ACCOUNTS to Verify Domain Controller RoleAt a command prompt, Cmd.exe, enter the following to determine the current role of a domain controller:
<DriveLetter>\NET ACCOUNTSBelow is a sample of the output:
c:\>NET ACCOUNTS Force user logoff how long after time expires?: Never Minimum password age (days): 0 Maximum password age (days): 42 Minimum password length: 0 Length of password history maintained: None Lockout threshold: Never Lockout duration (minutes): 30 Lockout observation window (minutes): 30 Computer role: PRIMARY The command completed successfully.The last line indicates the present role of the Domain Controller. click
|
Additional query words: Srvmgr.exe Usrmgr.exe Musrmgr.exe
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |