Seagate Tape Drive Light Stays Lit After Exiting NTBACKUPLast reviewed: December 22, 1997Article ID: Q170568 |
The information in this article applies to:
SYMPTOMSOn Seagate CTT8000-A (ATAPI) tape drives, when you start Ntbackup.exe, the LED activity indicator light on the tape drive lights up and stays continuously lit, even after exiting NTBACKUP. The LED will remain lit even if there is no activity from the drive. The LED will only go out if you eject the tape and re-insert it. The symptom will show up each time you execute Ntbackup.exe.
CAUSEWhen NTBACKUP exits, it issues a REWIND IMMEDIATE, which ATAPI drives do not support.
STATUSMicrosoft has confirmed this to be a problem in Windows NT version 4.0. A supported fix is now available, but has not been fully regression-tested and should be applied only to systems experiencing this specific problem. Unless you are severely impacted by this specific problem, Microsoft recommends that you wait for the next Service Pack that contains this fix. Contact Microsoft Technical Support for more information. Keywords : kbbug4.00 kbfix4.00 ntbackup NTSrvWkst kbbuglist kbfixlist Version : 4.0 Platform : winnt Hardware : ALPHA x86 Issue type : kbbug Solution Type : kbfix |
================================================================================
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |