Microsoft File and Print Services for NetWare Readme.txt

Last reviewed: December 23, 1997
Article ID: Q177601
The information in this article applies to:
  • Microsoft Windows NT Server version 4.0
  • Microsoft File and Print Services for NetWare version 4.0

The following is the text of the Microsoft File and Print Services for NetWare (FPNW) version 4.0 Readme.txt file.

Microsoft File and Print Services for NetWare® for Microsoft Windows NT Server Version 4.0

RELEASE NOTE:

Welcome to File and Print Services for NetWare (FPNW) for Microsoft Windows NT Server version 4.0. This compact disc contains both File and Print Services for NetWare and Directory Service Manager for NetWare.

INSTALLING FPNW VERSION 4.0:

File and Print Services for NetWare version 4.0 can be installed only on computers running Windows NT Server version 4.0. You must be logged on as a member of the Administrators group to install FPNW.

Follow this procedure only to install FPNW version 4.0 on a computer that does not already have FPNW. To upgrade from a previous version of FPNW , see "Upgrading From Previous Version of FPNW."

TO INSTALL FPNW:

  1. Insert the Services for NetWare compact disc in the computer's CD-ROM drive.

  2. Double-click My Computer, and then double-click Control Panel.

  3. Double-click Network.

  4. Click the Services tab, then click Add.

  5. Click Have Disk. IMPORTANT -- If File and Print Services for NetWare appears in the Network Service list, do not select it; instead, click "Have Disk".

  6. Type the appropriate path, and click OK.

    The path is drive:\FPNW\NT40\processor, where drive is the drive letter of the CD-ROM drive and processor is the server's processor type. For example, type d:\fpnw\nt40\i386 to install on an x86-based computer with a CD-ROM drive at drive D. The possible values for processor are i386, MIPS, ALPHA, and PPC.

  7. Select File and Print Services for NetWare, and click OK. The Setup program copies files.

  8. In the Directory For SYS Volume box, type the location for the SYSVOL directory that will be the NetWare SYS: volume. It is recommended that you specify a directory on an NTFS partition; if you specify a directory on a non-NTFS partition, you lose the security features that NTFS provides and will not be able to set or enforce file or directory security settings.

  9. In the Server Name box, type the computer name that NetWare client computers will use to access the server. The default is the server's computer name with _FPNW (underscore FPNW) appended.

    IMPORTANT -- The Server Name you specify must be in all capital letters and must be unique.

  10. Type a password for the Supervisor's account in the Supervisor Account group box.

    You must type the same password in the Password and Confirm Password boxes. The password can be as many as 14 characters, and is case- sensitive.

  11. In the Advanced Tuning group box, select one of the options to tune the server's performance.

    You can change these options later using the Network application in the Control Panel. Click the Services tab, click "File and Print Services for NetWare," and then click Properties.

  12. If you are installing File and Print Services for NetWare on a domain controller, you are prompted to enter a password for the FPNW Service Account.

    If you install File and Print Services for NetWare on multiple domain controllers in a domain, you must specify the same password for this account on each domain controller on which you install the utility.

  13. Click Close, and then restart the computer to complete the installation.

UPGRADING FROM A PREVIOUS VERSION OF FPNW:

Follow this procedure only to upgrade to version 4.0 of FPNW on a server that already has FPNW version 3.51 or an earlier beta of FPNW version 4.0 installed.

IMPORTANT -- Do not run any previous versions of FPNW on a server running Windows NT Server 4.0. Use the following steps to upgrade a server from version 3.51 of Windows NT Server and FPNW to the 4.0 versions of these products:

  1. Stop the File and Print Services for NetWare service on the server. To do so, use the Services icon in Control Panel, or type net stop fpnw.

  2. Upgrade Windows NT Server to version 4.0. For instructions, see your Windows NT Server documentation.

  3. Upgrade File and Print Services for NetWare to version 4.0. For instructions, see the following procedure.

TO UPGRADE TO FPNW VERSION 4.0:

  1. Insert the Services for NetWare compact disc in the computer's CD-ROM drive.

  2. Double-click My Computer, then double-click Control Panel.

  3. Double-click Network.

  4. Click the Services tab.

  5. Select File and Print Services for NetWare, then click Update.

  6. Type the appropriate path, and click OK.

    The path is drive:\FPNW\NT40\processor, where drive is the drive letter of the CD-ROM drive and processor is the server's processor type.

    For example, type d:\fpnw\nt40\i386 to install on an x86-based computer with a CD-ROM drive at drive D. The possible values for processor are i386, MIPS, ALPHA, and PPC.

  7. Click Close, and then restart the computer to complete the installation.

INSTALLING NOTE:

Installation Problem With Alpha Processors

If you install on a computer with an Alpha processor, using the computer's own CD-ROM drive, you may receive the following error message during file copying:

   An error occurred while Windows was working with the Control Panel file
   %systemroot%\system32\ncpa.cpl

To work around the problem, put the Services for NetWare compact disc in another computer's CD-ROM drive, share the drive, and install using the remote CD-ROM drive.

ONLINE ADMINSTRATOR’S GUIDE:

Services for NetWare includes an online Administrator's Guide. To install the online Administrator's Guide on your computer, copy all the files from the \FPNW\NT40\ONLINE.DOC directory of the compact disc to a directory on the hard drive.

To use the online book, double-click the MS-SFN.HLP file icon in the Explorer, or specify that file in the Run command of the Start menu.

Remote Administration Tools for Windows 95 and Windows for Workgroups

This compact disc also contains remote administration tools, which can be used to administer Windows NT Server from computers running Windows 95 and Windows for Workgroups.

The tools in the \WIN95.RAD directory are for use on Windows 95 computers. These tools include functionality to remotely administer File and Print Services for NetWare, as well as Windows NT Server. For more information On these tools, see \WIN95.RAD\SRVTOOLS.TXT, or see the online help by Typing win32hlp d:\win95.rad\srvtools.hlp, where d: is the drive letter of the CD- ROM.

The tools in the \WFW.RAD directory are for use on Windows for Workgroups computers. These tools include functionality to remotely administer only Windows NT Server. For more information on these tools, see \WFW95.RAD\Readme.txt.

IMPORTANT -- Do not use previously released versions of these remote administration tools to administer FPNW (NetWare-enabled ) users. These previous versions may corrupt the user account information of FPNW users.

If you are using Windows NT Server remote administration tools on any Windows 95 or Windows for Workgroups computers, update them to the versions contained on this compact disc immediately.

MISCELLANEOUS NOTES

Removing FPNW

After you remove FPNW and reboot, the FPNW control panel application will still be present. To remove the application, close the control panel, and then delete the %systemroot%\system32\fpnwmgr.cpl file.

Incorrect Installation of Earlier FPNW Beta on Windows NT Server 4.0 RC

If you upgraded to Windows NT Server 4.0 RC, and then tried installing an earlier Beta version of FPNW 4.0, you have an incorrect version of fpnwclnt.dll installed. To expand and copy the correct version from the Services for NetWare compact disc, type

   expand  d:\fpnw\nt40\i386\fpnwclnt.dl_
   %systemroot%\system32\fpnwclnt.dll

where d: is the CD-ROM drive.

NetWare Client 32TM Redirector

This release does not support Novell's NetWare Client 32 redirector. For more information, please check the www.microsoft.com web site.

Two Check Boxes Are Mutually Exclusive

On a server running File and Print Services for NetWare, two check boxes are mutually exclusive. These are the "Users Must Log On In Order To Change Password" check box (in the Account Policy dialog box) and the "User Must Change Password at Next Logon" check box (in the User Properties Dialog box).

If the "Users Must Log On In Order To Change Password" check box is marked, then users who have the "User Must Change Password at Next Logon" check box marked in their accounts cannot use CHGPASS (or SETPASS or LOGIN) to change their passwords after they have logged on to the server.

It is recommended that you do not select both these check boxes for File and Print Services for NetWare users.

Using Windows NT Server as a Client to Connect to NetWare Servers

On a computer running Windows NT Server and File and Print Services for NetWare, the automatic restoration of connections from that computer to NetWare servers may not work if the computer does not have a preferred server selected, and a user logs in immediately after booting the computer. This happens because the Windows NT Server computer does not have time to gather information about available NetWare servers before attempting to restore connections.

PRINTING NOTES

Network Print Server Devices Tested

File and Print Services for NetWare has been tested with the following network print server devices:

HP® JetDirect® cards Intel® NetPort® XL Xircom II series Milan FastPort 3000 series Digital NetPrint 100 Emulex NetJet card AXIS NPS 550 Extended Systems ESI2866A Castelle LANpress

Setting Up the Milan Network Print Server Device

To successfully set up File and Print Services for NetWare to print to a printer attached to a Milan network print server device, use the following procedure:

  1. Use the Printers folder to create a logical printer for the printer. Be sure to set the following in the Printer Properties dialog box:

        - On the Ports tab, specify NetWareCompatiblePServer0 or
          NetWareCompatiblePServer1 as the port.
    

        - On the Sharing tab, mark the Shared check box.
    

  2. In Server Manager, click Print Servers from the FPNW menu.

  3. Click Add, and specify FPxxxxxx in the Print Server box, where xxxxxx are the last 6 characters of the Milan MAC address. You can find the address printed on the bottom of the device. Then click OK.

  4. Back in the Print Servers On dialog box, select the print server you created in step 3, and then click Printers.

  5. In the Printers on Print Server dialog box, click Add.

  6. Fill out the Add Printer To dialog box with information for the printer. Be sure to specify Remote Other/Unknown in the Type box. Then click OK.

  7. Back in the Printers on Print Server dialog box, click Queues, and add the queue you created in step 1.

Miscellaneous Printing Notes

If you find that print jobs sent from NetWare clients to File and Print Services for NetWare printers are not printing banner sheets, or are not notifying clients correctly, you should check certain printer properties.

To check the printer properties:

  1. Open the Printers folder.

  2. Select the printer, and then choose Properties from the Printer menu.

  3. On the Ports tab, check that the port is set correctly, to either a NetWareCompatiblePServer port or a local port, such as LPT1:

  4. On the Sharing tab, check that the printer has been shared on the network.

  5. On the General tab, click the Print Processor button, and then check that the print processor is set to "nwprint."

  6. Click OK.

  7. Close the Printers folder, and then stop and restart the File and Print Services for NetWare service.

Similarly, if you have two printer queues that use the same printer, and one of the printer queues has the Job Type set to WINPRINT, then jobs in that queue may freeze with the message "Waiting for PServer", causing both queues to freeze. To correct this problem, stop and restart the print server software, or stop and restart the File and Print Services for NetWare service.

Legal Notices

Third-Party License Agreements

Administrators should ensure they comply with all applicable license agreements governing use of software in conjunction with File and Print Services for NetWare.

Microsoft® and Windows NT® are registered trademarks of Microsoft Corporation in the U.S. and/or other countries.

Novell and NetWare are registered trademarks and NetWare Client 32 is a trademark of Novell, Inc.

Other companies and product names may be trademarks of their respective companies.

Keywords          : NTINTEROP NTSrvWkst kbinterop
Version           : WinNT:4.0
Platform          : winnt
Hardware          : ALPHA x86
Issue type        : kbinfo


================================================================================


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: December 23, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.