MS-DOS Client 3.0 Hangs with Third-Party DHCP Server

Last reviewed: February 2, 1998
Article ID: Q179238
The information in this article applies to:
  • Microsoft Windows NT Workstation versions 3.51 and 4.0
  • Microsoft Windows NT Server versions 3.51 and 4.0

SYMPTOMS

The MS-DOS 3.0 network client may stop responding (hang) during the boot sequence in Tcptsr.exe when using a third-party Dynamic Host Control Protocol (DHCP) server that does not send the DHCP options RENEWAL TIME and REBIND TIME for infinite leases. The problem does not occur with the Microsoft DHCP server.

WORKAROUND

To work around this problem, configure the DHCP server to send both fields even for infinite leases.

Keywords          : NTSrvWkst
Version           : WinNT:3.51,4.0
Platform          : winnt
Issue type        : kbprb


================================================================================


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: February 2, 1998
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.