Error Msg: No More Connections Can Be Made At This Time

Last reviewed: February 9, 1998
Article ID: Q179483
The information in this article applies to:
  • Microsoft Windows NT Workstation versions 3.51 and 4.0
  • Microsoft Windows NT Server versions 3.51 and 4.0
  • Microsoft Windows 95

SYMPTOMS

Users on computers running Windows NT report the following error:

   No more connections can be made at this remote computer at this time
   because there are already as many connections as the computer can
   accept.

Users on computers running Windows 95 report the following error:

   This request is not accepted by the network. Try again later.

CAUSE

The user may be attempting to connect to a share that is configured to allows a specific number of connections, and that number of connections has been reached. Check the properties on the share on the server.

RESOLUTION

If the specified number of connections has been reached, increase the user limit or set the value to "maximum allowed."

MORE INFORMATION

There are several other parameters that you can check when troubleshooting a problem with limited connections to the computer.

  • Verify that the computer is running a retail version of Windows NT. To verify this, check the Licensing tool in Control Panel and make sure that the following message does not appear:

          Not available in NFR (Not for Resale)/MSDN Edition of Windows NT
          Server.
    
  • The server may be configured with Per Server licensing and the number of licenses may be exhausted. A quick check to see if this is the problem would be turn off the License Logging Service on the computer.
  • Check to see if the server was configured by upgrading a computer running Windows NT Workstation to Windows NT Server. If it was, the following registry parameter may need to be increased from a hex value of (10) to 0xFFFFFFFF:

          HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanManServer
          \Parameters\Users
    

    NOTE: The above registry key is one path; it has been wrapped for readability.

    For additional information on changing this value, please see the following article in the Microsoft Knowledge Base:

          ARTICLE-ID: Q122925
    
          TITLE     : Upgrading From Workstation to Server Limited to 10
                      Connections
    
    
For additional information, please see the following articles in the Microsoft Knowledge Base:

   ARTICLE-ID: Q122920
   TITILE: Inbound Connections Limit in Windows NT Workstation 3.5x & 4.0

   ARTICLE-ID: Q149522
   TITLE: System Error 71 and License Manager

   ARTICLE-ID: Q148967
   TITLE: Err Msg: "This Request Not Accepted by Network" on WFWG Client

   ARTICLE-ID: Q130631
   TITLE: Client License Assignment in Per Server Mode

   ARTICLE-ID: Q156431
   TITLE: XADM: Error 71 When Using NT Server from MSDN Select CD


Additional query words: fail evaluation developers network
Keywords : ntdomain NTSrvWkst
Version : WinNT:3.51,4.0;Windows:95
Platform : winnt
Hardware : x86
Issue type : kbprb


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: February 9, 1998
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.