If a recommended feature is implemented, it must meet the PC 98 requirements for that feature as defined in this document.
1. All devices comply with the PC Card standards
Required |
2. System and ZV-compatible PC Card 16 cards comply with ZV standard definitions
Required |
3. Controller supports industry-standard ExCA register set
Required |
4. System maintains mapping of IRQ Routing Register bits to system interrupt vectors
Required |
5. IRQ connections can be determined by using the 0805 register
Required |
6. CardBus controllers support both ISA and PCI interrupts
Required |
7. System supports industry-standard definition for CardBus bridges
Required |
8. BIOS initializes CardBus controller in 82365-compatible mode and supports backward compatibility
Recommended |
9. CardBus controllers do not share writable PCI Configuration Space bits
Required |
10. Each PC Card 16 memory window in CardBus controller has it own page register
Required |
11. Card supports required I/O card tuples
Required |
12. Configuration table entry tuples listed in priority order
Required |
13. Card specifies maximum configuration options
Required |
14. Configuration space meets Common Silicon Guidelines
Required |
15. RESERVED fields comply with PCI 2.1
Required |
16. CardBus card implements required and recommended tuples
Required |
17. Socket controller complies with device class power management reference specification
Required |
18. PC Card 16 cards implement power-related events using ReqAttn bit and #STSCHG mechanism
Required |
19. CardBus controllers and cards implement power management specifications
Required |
20. No user intervention required for correctly installing devices
Required |
21. Device is immediately functional without restarting the system
Required |
22. ZV-compatible PC Card driver uses DirectDraw LVE
Required |
23. PC Card 16 card driver supports sharing of level-mode interrupts
Required |