Checklist for Modems

If a recommended feature is implemented, it must meet the PC 98 requirements for that feature as defined in this document.

Consumer PC 98 Office PC 98 Entertainment PC 98

1. Modem device is provided with PC system

Required Required, if no PCM modem required,
network adapter upgradable to V.pcm

2. Modem supports TIA-602 Hayes-compatible command set

Required

3. Data modem supports 33.6 Kbps (V.34-1996) with V.42 and V.42bis protocol

Required

4. Data modem supporting speeds faster than 33.6 Kbps can be upgraded to V.pcm

Required

5. Fax modem supports 14.4 Kbps (V.17) with Class 1 (TIA-578-A) command set

Required

6. Data modem supports V. 80 for synchronous access

Recommended

7. Modem supports adaptive connection, V.25, V.8, and V.8bis call control signaling with V.25ter Annex A modem commands

Recommended

8. Modem supports delayed and blacklisted number clearing

Recommended

9. Modem supports TDD, meeting V.18-1996 with V.25ter AT commands

Recommended

10. PCM modem supports ITU-T V.pcm

Required

11. Modem controller meets PC 98 requirements

Required

12. Voice modem supports TIA-695 (AT+V)

Recommended Recommended Required

13. Voice modem support includes PC 98 recommendations

Recommended

14. Voice modem supports local telset interfaces

Recommended

15. Voice modem supports simultaneous voice/data integration capabilities

Recommended

16. Voice modem supports speakerphone

Recommended

17. Voice modem supports full-duplex voice I/O

Recommended

18. Wireless support implemented for modems

Recommended

19. Digital cellular phone support is implemented for modems

Recommended

20. ISDN modem supports required command set

Required

21. ISDN modem supports auto-SPID detection algorithms and standard SPID format

Required

22. ISDN modem supports CHAP in firmware if B channels are not exposed

Required

23. ISDN modem exposes both B channels

Recommended

24. ISDN modem supports multilink PPP

Recommended

25. ISDN modem supports asynchronous-to-synchronous conversion

Required

26. ISDN modem uses high-speed port

Recommended

27. ISDN driver supports switch detection

Recommended

28. ISDN driver supports unattended installation, with limitations

Required

29. Each device has a unique Plug and Play device ID

Required

30. Each device has a compatible Plug and Play device ID

Required

31. Automatic resource assignment and dynamic disable capabilities are supported

Required

32. PCI modem meets PCI 2.1 requirements

Required

33. USB modem meets USB specifications

Required

34. Device Bay modem meets PC 98 requirements

Required

35. Device complies with device class power management reference specification

Required

36. Device supports wake-up events

Required

37. Device drivers and installation meet PC 98 requirements

Required

38. Driver supports Unimodem

Required

39. Applications provided with device meet Win32 requirements

Required