Home | Overview | How Do I | FAQ
Some of the most common sources of program errors are not flagged as exceptions by the system. For example, if you attempt to allocate a memory block but there is insufficient memory, the run-time or API function does not raise an exception but returns an error code.
However, you can treat any condition as an exception by detecting that condition in your code and then reporting it by calling the RaiseException function. By flagging errors this way, you can bring the advantages of structured exception handling to any kind of run-time error.
To use structured exception handling with errors:
The WINERROR.H file shows the format for exception codes. To make sure that you do not define a code that conflicts with an existing exception code, set the third most significant bit to 1. The four most-significant bits should be set as shown in the following table.
| Bits | Recommended binary setting | Description |
| 31-30 | 11 | These two bits describe the basic status of the code: 11 = error, 00 = success, 01 = informational, 10 = warning. |
| 29 | 1 | Client bit. Set to 1 for user-defined codes. |
| 28 | 0 | Reserved bit. (Leave set to 0.) |
You can set the first two bits to a setting other than 11 binary if you want, although the “error” setting is appropriate for most exceptions. The important thing to remember is to set bits 29 and 28 as shown in the previous table.
The resulting error code should therefore have the highest four bits set to hexadecimal E. For example, the following definitions define exception codes that do not conflict with any Windows 95 or Windows NT exception codes. (You may, however, need to check which codes are used by third-party DLLs.)
#define STATUS_INSUFFICIENT_MEM 0xE0000001
#define STATUS_FILE_BAD_FORMAT 0xE0000002
After you have defined an exception code, you can use it to raise an exception. For example, the following code raises the STATUS_INSUFFICIENT_MEM exception in response to a memory allocation problem:
lpstr = _malloc( nBufferSize );
if (lpstr == NULL)
RaiseException( STATUS_INSUFFICIENT_MEM, 0, 0, 0);
If you want to simply raise an exception, you can set the last three parameters to 0. The three last parameters are useful for passing additional information and setting a flag that prevents handlers from continuing execution. See the RaiseException function in the Win32 Programmer’s Reference for more information.
In your exception-handling filters, you can then test for the codes you’ve defined. For example:
__try {
...
}
__except (GetExceptionCode() == STATUS_INSUFFICIENT_MEM ||
GetExceptionCode() == STATUS_FILE_BAD_FORMAT )