This note will discuss the issues relating to in-place editing and how a server should accomplish correct zooming and in-place resizing. With in-place activation, the WYSIWYG concept is taken one step further in that containers and servers cooperate with each other, and in particular interpret the OLE specification in much the same way.
Because of the close interaction between a container and server supporting in-place activation there are a number of expectations from the end-user that should be maintained:
Note Because in-place activation only applies to items which are embedded (not linked), zooming only applies to embedded objects. You'll see APIs in both COleServerDoc and COleServerItem that are used for zooming. The reason for this dichotomy is that only functions which are valid for both linked and embedded items are in COleServerItem (this allows you to have a common implementation) and functions which are valid only for embedded objects are located in the COleServerDoc class (from the server's perspective, it is the document which is embedded).
Most of the burden is placed on the server implementor, in that the server must be aware of the container's zoom factor and modify its editing interface as appropriate. But how does the server determine the zoom factor that the container is using?
MFC Support for Zooming
The current zoom factor can be determined by calling COleServerDoc::GetZoomFactor. Calling this when the document is not in-place active will always result in a 100% zoom factor (or 1:1 ratio). Calling it while in-place active may return something other than 100%.
For an example of zooming correctly see the MFC OLE sample HIERSVR. Zooming in HIERSVR is complicated by the fact that it displays text — and text, in general, does not scale in a linear fashion (hints, typographic conventions, design widths and heights all complicate the matter). Still, HIERSVR is a reasonable reference for implementing zooming correctly, and so is the MFC Tutorial SCRIBBLE (step 7).
COleServerDoc::GetZoomFactor determines the zoom factor based on a number of different metrics available either from the container or from the implementation of your COleServerItem and COleServerDoc classes. In short, the current zoom factor is determined by the following formula:
Position Rectangle (PR) / Container Extent (CE)
The POSITION RECTANGLE is determined by the container. It is returned to the server during in-place activation when COleClientItem::OnGetItemPosition is called and is updated when the container calls the server's COleServerDoc::OnSetItemRects (with a call to COleClientItem::SetItemRects).
The CONTAINER EXTENT is slightly more complex to calculate. If the container has called COleServerItem::OnSetExtent (with a call to COleClientItem::SetExtent), then the CONTAINER EXTENT is this value converted to pixels based on the number of pixels per logical inch. If the container has not called SetExtent (which is usually the case), then the CONTAINER EXTENT is the size returned from COleServerItem::OnGetExtent. So, if the container has not called SetExtent, the framework assumes that if it did the container would have called it with 100% of the natural extent (the value returned from COleServerItem::GetExtent). Or stated another way, the framework assumes that the container is displaying 100% (no more, no less) of the item.
It is important to note that although COleServerItem::OnSetExtent and COleServerItem::OnGetExtent have similar names, they do not manipulate the same attribute of the item. OnSetExtent is called to let the server know how much of the object is visible in the container (regardless of the zoom factor) and OnGetExtent is called by the container to determine ideal size of the object.
By looking at each of the APIs involved here you can get a clearer picture:
COleServerItem::OnGetExtent
This function should return the "natural size" in HIMETRIC units of the item. The best way to think of the "natural size" is to define it as the size it might appear when printed. The size returned here is constant for a particular item contents (much like the metafile, which is constant for a particular item). This size does not change when zooming is applied to the item. It usually does not change when the container gives the item more or less space by calling OnSetExtent. An example of a change might be that of a simple text editor with no "margin" capability that wrapped text based on the last extent sent by the container. If a server does change, the server should probably set the OLEMISC_RECOMPOSEONRESIZE bit in the system registry (see the OLE SDK documentation for more information on this option).
COleServerItem::OnSetExtent
This function is called when the container shows "more or less" of the object. Most containers will not call this at all. The default implementation stores the last value received from the container in 'm_sizeExtent', which is used in COleServerDoc::GetZoomFactor when computing the CONTAINER EXTENT value described above.
COleServerDoc::OnSetItemRects
This function is called only when the document is in-place active. It is called when the container updates either the item's position or the clipping applied to the item. The POSITION RECTANGLE, as discussed above, provides the numerator for the zoom factor calculation. A server can request that the item position be changed by calling COleServerDoc::RequestPositionChange. The container may or may not respond to this request by calling OnSetItemRects (with a call to COleServerItem::SetItemRects).
COleServerDoc::OnDraw
It is important to realize that the metafile created by overriding of COleServerItem::OnDraw produces exactly the same metafile, regardless of the current zoom factor. The container will scale the metafile as appropriate. This is an important distinction between the view's OnDraw and the server item's OnDraw. The view handles zooming, the item just creates a zoomable metafile and leaves it up to the container to do the appropriate zooming.
The best way to insure that your server behaves correctly is to use the implementation of COleServerDoc::GetZoomFactor if your document is in-place active.
MFC Support for In-Place Resizing
MFC fully implements the in-place resizing interface as described in the OLE 2 specification. The user-interface is supported by the COleResizeBar class, a custom message WM_SIZECHILD, and special handling of this message in COleIPFrameWnd.
You may want to implement different handling of this message than what is provided by the framework. As described above, the framework leaves the results of in-place resizing up to the container — the server responds to the change in the zoom factor. If the container reacts by setting the both CONTAINER EXTENT and POSITION RECTANGLE during the processing of its COleClientItem::OnChangeItemPosition (called as a result of a call to COleServerDoc::RequestPositionChange) then the in-place resize will result in showing "more or less" of the item in the editing window. If the container reacts by just setting the POSITION RECTANGLE during the processing of COleClientItem::OnChangeItemPosition, the zoom factor will change and the item will be shown "zoomed in or out."
A server can control (to some degree) what happens during this negotiation. A spreadsheet, for example might elect to show more or fewer cells when the user resizes the window while editing the item in-place. A word-processor might elect to change the "page margins" so they are the same as the window and rewrap the text to the new margin. Servers implement this by changing the natural extent (the size returned from COleServerItem::OnGetExtent) when the resizing is done. This will cause both the POSITION RECTANGLE and the CONTAINER EXTENT to change by the same amount, resulting in the same zoom factor, but a bigger or smaller viewing area. In addition, more or less of the document will be visible in the metafile generated by OnDraw. In this case, the document itself is changing when the user resizes the item, instead of just the viewing area.
You can implement custom resizing and still leverage the user interface provided by COleResizeBar by overriding the WM_SIZECHILD message in your COleIPFrameWnd class. For more information on the specifics of WM_SIZECHILD, see Technical Note 24.