ConfigPriority = <Priority_Value>
Sets the priority value for the logical configuration. Only one ConfigPriority item can be used in a LogConfig section.
Priority_Value
Can be one of these values:
Value | Meaning |
HARDWIRED | Cannot be reset in any way |
DESIRED | Soft Configurable most optimal |
NORMAL | Soft Configured medium optimal |
SUBOPTIMAL | Soft Configured least optimal |
DISABLED | Hardware disabled |
RESTART | Requires Windows restart to affect |
REBOOT | Requires system reboot to affect |
POWEROFF | Requires power cycle to affect |
HARDRECONFIG | Requires Jumper setting |