Description This command is used to clear the envelope deposit transport from any envelopes or items left in the entry slot of the device. The envelopes can be either captured or completely ejected.
Input Param None.
Output Param None.
Error Codes The following additional error codes can be generated by this command:
Value Meaning
WFS_ERR_DEP_DEPFULL The deposit container is full.
WFS_ERR_DEP_DEPJAMMED An envelope jam occurred in the deposit transport.
WFS_ERR_DEP_CONTMISSING The deposit container is not present.
WFS_ERR_DEP_SHTNOTCLOSED The shutter failed to close.
Events There are no additional events generated by this command.
Comments None.