Description This command is used to set the status of a Guidance Light.
Input Param LPWFSSIUSETGUIDLIGHT lpSetGuidLight;
typedef struct _wfs_siu_set_guidlight
{
WORD wGuidLight;
WORD fwCommand;
} WFSSIUSETGUIDLIGHT, * LPWFSSIUSETGUIDLIGHT;
wGuidLights
Specifies the index of the Guidance Light to set as one of the following values:
Value Meaning
WFS_SIU_CARDUNIT Set the state of the Guidance Light Indicator on the Card Unit (IDC).
WFS_SIU_PINPAD Set the state of the Guidance Light Indicator on the PIN pad unit.
WFS_SIU_NOTESDISPENSER Set the state of the Guidance Light Indicator on the note dispenser unit.
WFS_SIU_COINDISPENSER Set the state of the Guidance Light Indicator on the coin dispenser unit.
WFS_SIU_RECEIPTPRINTER Set the state of the Guidance Light Indicator on the receipt printer unit.
WFS_SIU_PASSBOOKPRINTER Set the state of the Guidance Light Indicator on the passbook printer unit.
WFS_SIU_ENVDEPOSITORY Set the state of the Guidance Light Indicator on the envelope depository unit.
WFS_SIU_CHEQUEUNIT Set the state of the Guidance Light Indicator on the cheque processing unit.
WFS_SIU_BILLACCEPTOR Set the state of the Guidance Light Indicator on the bill acceptor unit.
WFS_SIU_ENVDISPENSER Set the state of the Guidance Light Indicator on the envelope dispenser unit.
fwCommand
Specifies the state of the Guidance Light indicators, as one of the following flags:
Value Meaning
WFS_SIU_OFF The Light Indicator is turned off.
WFS_SIU_SLOW_FLASH The Light Indicator is set to flash slowly.
WFS_SIU_MEDIUM_FLASH The light is blinking medium frequency.
WFS_SIU_QUICK_FLASH The Light Indicator is set to flash quickly.
WFS_SIU_CONTINUOUS The Light Indicator is turned on continuously (steady).
See WFS_CMD_SIU_SET_PORTS command for a detailed description.
Output Param None.
Error Codes The following additional error codes can be generated by this command:
Value Meaning
WFS_ERR_SIU_INVALID_PORT An attempt to set a port to a new value was invalid because the port does not exist or the port is pre-configured as an input port.
WFS_ERR_SIU_SYNTAX The command was invoked with incorrect input data.
Events The following additional events can be generated by this command:
Value Meaning
WFS_EXEE_SIU_PORT_ERROR An error occurred while attempting to set or clear one or more output ports (indicators).
Comments None.