Description This command is used to set the status of the LEDs.
Input Param LPWFSTTUSETLEDS
lpSetLEDs;
typedef struct _wfs_ttu_set_leds
{
WORD wLED;
WORD fwCommand;
} WFSTTUSETLEDS, * LPWFSTTUSETLEDS;
wLED
Specifies the index of the LED to set.
fwCommand
Specifies the state of the LED, as one of the following flags:
Value Meaning
WFS_TTU_LEDOFF The LED is turned off.
WFS_TTU_LEDSLOWFLASH The LED is set to flash slowly.
WFS_TTU_LEDMEDIUMFLASH The LED is blinking medium frequency.
WFS_TTU_LEDQUICKFLASH The LED is set to flash quickly.
WFS_TTU_LEDCONTINUOUS The LED is turned on continuously (steady).
Output Param None.
Error Codes The following additional error codes can be generated by this command:
Value Meaning
WFS_ERR_TTU_INVALIDLED An attempt to set a LED to a new value was invalid because the LED does not exist.
Events There are no additional events generated by this command.
Comments None.