| Message ID | Severity | Message text |
|---|---|---|
|
10000 |
Error |
A data integrity error was detected for advertisement %1 (%2%1.ofr). Possible cause: The advertisement (.ofr) file on this client access point (CAP) is missing, corrupt, or lacking data. The advertisement will not be run or displayed to users. Solution: Modify the specified advertisement in the SMS Administrator console to force Offer Manager to update (rewrite) the advertisement files. Wait for Inbox Manager to replicate the change to the CAPs throughout the site before refreshing the list of advertised programs on the client (press F5 in the Advertised Programs Monitor). If the problem persists, check for disk problems on the CAP or for other external causes of file corruption. |
|
10001 |
Error |
A data integrity error was detected for package %1 (%2%1.pkg). Possible cause: The package (.pkg) or network location (.nal) file on this client access point (CAP) is missing, corrupt, or lacking data. Advertisements for the package’s programs will not be run or displayed to users until the file can be read successfully. Solution: Modify the specified package or one of its programs to force SMS Distribution Manager to update (rewrite) the package files. Wait for SMS Inbox Manager to replicate the change to the CAPs throughout the site before refreshing the list of advertised programs on the client (press F5 in the Advertised Programs Monitor). If the problem persists, check for disk problems on the CAP or for other external causes of file corruption. |
| 10002 | Informational | Advertisement %1 was received from site %2.
The client passes any supported platform requirements and the SMS Advertised Programs Manager will add the advertisement’s program to the list that will be displayed to users and/or run via assignment. If an advertisement is received but not displayed on a client, verify that the current time on the client is between the advertisement start and expiration times, and that the program specified in the advertisement is enabled. |
|
10003 |
Error |
An error occurred while preparing to run the program for advertisement %1 (%4 - %5). Additional program properties: Possible cause: This message most commonly occurs when the program’s command-line executable file could not be found, when a required drive letter connection to a distribution point could not be established, or when the program is configured to use the Windows NT Client Software Installation Account but the account is not specified, could not be found, or does not have the appropriate permissions. Solution: Check each of the items listed above. |
|
10004 |
Error |
The program for advertisement %1 could not be executed (%4 - %5). Additional program properties: Possible cause: This error can be caused by an invalid executable file specified in the command line (such as an Alpha executable file on an Intel computer) or by a corrupt executable file. Solution: Make sure that the executable file specified in the program’s command line is valid for the computer it is attempting to run on. Also, verify manually that the specified command line can be executed from within the original package source directory. If necessary, modify the program properties, the package source directory contents, or both. If changes to the package source directory are required, use the Manage Distribution Points wizard to update all of the package’s distribution points with the new version of the package source files before retrying execution on the client computer. |
|
10005 |
Informational |
Program started for advertisement %1 (%4 - %5). Command line: %2 |
|
10006 |
Error |
The program for advertisement %1 failed (%4 - %5). A non-zero exit code of %2 was returned. Possible cause: SMS Advertised Program Manager (APM) determines status for each program it executes. If APM cannot find or correlate any install status Management Information Format (MIF) files for the program, it uses the program’s exit code to determine status. A non-zero exit code is considered a failure. Solution: For more information on the exit code, refer to the documentation for the program you are distributing. |
|
10007 |
Error |
The program for advertisement %1 failed (%4 - %5). The failure description was %3. Possible cause: The program generated an install status Management Information Format (MIF) file with a status value of Failed. Solution: For more information about the failure, refer to the documentation for the program you are distributing. |
|
10008 |
Informational |
The program for advertisement %1 completed successfully (%4 - %5). An exit code of zero was returned. SMS Advertised Program Manager (APM) determines status for each program it executes. If APM cannot find or correlate any install status Management Information Format (MIF) files for the program, it uses the program’s exit code to determine status. An exit code of zero is considered successful. |
|
10009 |
Informational |
The program for advertisement %1 completed successfully (%4 - %5). The success description was %3. The program generated an install status Management Information Format (MIF) file with a status value of Success. For more information, see the documentation for the program you are distributing. |
|
10010 |
Error |
An error occurred while SMS Advertised Program Manager was preparing to run the uninstall program for advertisement %1 (%4 - %5). Additional program properties: Possible cause: SMS Advertised Program Manager is unable to find the uninstall command line executable file specified in the program’s uninstall registry key. Solution: Verify that the uninstall command registered by the program’s setup routines is valid for the client. |
|
10011 |
Error |
The uninstall program for advertisement %1 could not be executed Additional properties: Possible cause: The uninstall command line for the program cannot be executed successfully. This error can be caused by an invalid executable file specified in the uninstall command line (such as an Alpha executable file on an Intel computer) or by a corrupt executable file. Solution: Make sure that the executable file specified in the program’s uninstall command line is valid for the computer running the advertisement. |
|
10012 |
Informational |
Uninstall started for advertisement %1 (%4 - %5). Command line: %2 |
|
10013 |
Error |
The uninstall program for advertisement %1 failed (%4 - %5). A non-zero exit code of %2 was returned. Possible cause: SMS Advertised Program Manager (APM) determines status for each program it executes. If APM cannot find or correlate any install status Management Information Format (MIF) files for the program, it uses the program’s exit code to determine status. A non-zero exit code is considered a failure. Solution: For more information about the exit code, refer to the documentation for the program you are distributing. |
|
10014 |
Error |
The uninstall program for advertisement %1 failed (%4 - %5). The failure description was %3. Possible cause: The uninstall program generated an install status Management Information Format (MIF) file with a status value of Failed. Solution: For more information about the failure, refer to the documentation for the program you are distributing. |
|
10015 |
Informational |
The uninstall program for advertisement %1 completed successfully SMS Advertised Program Manager (APM) determines status for each program it executes. If APM cannot find or correlate any install status Management Information Format (MIF) files for the program, it uses the program’s exit code program to determine status. An exit code of zero is considered successful. |
|
10016 |
Informational |
The uninstall program for advertisement %1 completed successfully The program generated an install status Management Information Format (MIF) file with a status value of Success. For more information, see the documentation for the program you are distributing. |
|
10017 |
Error |
The uninstall for advertisement %1 failed. Possible cause: The removal key specified (%2) for the program in the advertisement (%4 - %5) cannot be found in the client registry or was found but did not contain either of the required uninstall command line entries (an UninstallString or a QuietUninstallString value). Solution: Verify that the removal key specified on the Advanced tab of the Program’s Properties dialog box exists in the client’s registry under HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Current Version\Uninstall and that it contains one of the required uninstall command-line entries. If necessary, adjust the key specified in the program’s properties. APM will retry the uninstall operation the next time the client’s list of advertised programs is refreshed and a change in the program’s properties is detected. |
|
10018 |
Warning |
Advertisement %1 from site %2 was rejected because the client’s platform is not supported. Possible cause: The client received the advertisement but rejected it because the client’s platform was not included in the list of supported platforms specified for the program. Solution: If the client should actually accept the advertisement, either disable supported platform checking or modify the list of supported platforms specified on the Requirements tab of the program’s Properties dialog box. Changes to the program properties will not be detected until the list of advertised programs is refreshed on the client (either during the polling interval or when you press F5 while in the Advertised Programs Monitor). |
|
10019 |
Warning |
Advertisement %1 from site %2 was rejected because the advertisement has expired. Possible cause: The client received the advertisement but rejected it because the advertisement expiration date is past. Solution: If the client should accept the advertisement, you can extend the life of the advertisement by changing the expiration date/time or disabling expiration on the Schedule tab of the advertisement’s properties. Changes to the advertisement’s Properties dialog box will not be detected until the list of advertised programs is refreshed on the client (either during the polling interval or when you press F5 in the Advertised Programs Monitor). |
|
10020 |
Informational |
The program for advertisement %1 (%4 - %5) will not be scheduled because the client is currently attached to the site with a slow network connection. Possible cause: The advertisement specified has the “Assignments are not mandatory over slow links” check box selected on its Schedule tab and the performance of the connection to the client access point (CAP) has either been detected as below the configured threshold, could not be determined, or is a Remote Access Service (RAS) connection. Solution: The advertisement will be scheduled for execution when the client next attaches to the site with a fast network connection. |
|
10021 |
Error |
The program for advertisement %1 failed (%4 -%5). The program was able to be executed but the system was restarted unexpectedly before the program could be completed or before status could be recorded. No install status MIF was found after the system restarted. Possible cause: The program performs a restart of the client computer when it completes, but the After running setting in the program's properties is not set to Program restarts computer, or the client machine was restarted while the program was running. Solution: Verify the above. If the program itself does a restart when it completes, even if it only requires a restart in some cases, modify the program’s properties and set After running to Program restarts computer. |