[MSTCP]

This section sets parameters for Microsoft TCP/IP. For more information about Chapter 12, "Network Technical Discussion."

DHCP

This parameter specifies whether TCP/IP is configured to use DHCP for dynamic TCP/IP configuration.

Parameter

DHCP

Values

0 = Don't enable DHCP
1 = Enable DHCP

Default

1


DNS

This parameter enables DNS name resolution. You must also set DNS=1 if you plan to use LMHOSTS for name resolution.

Parameter

DNS

Values

0 = Disable DNS
1 = Enable DNS

Default

0


DNS Servers

This parameter is a list of the DNS servers to use in the order to try them.

Parameter

DNSServers

Values

Comma-separated list of DNS server names

Default

None


Domain

This parameter sets the DNS domain that this computer is in.

Parameter

Domain

Values

String

Default

None


Domain Order

This parameter sets a list of DNS domains for host name resolution in the order to try them.

Parameter

DomainOrder

Values

Comma-separated list of DNS domains

Default

None


Gateways

This parameter lists the IP gateways (sometimes called IP routers) in the order they are to be used.

Parameter

Gateways

Values

Comma-separated list of IP addresses

Default

None


Hostname

This parameter sets the DNS hostname for this computer (usually the same value as ComputerName).

Parameter

Hostname

Values

String

Default

None


IP Address

This parameter sets the computer's IP address if DHCP is not enabled.

Parameter

IPAddress

Values

Internetwork Protocol (IP) address (###.###.###.###)

Default

None


LMHOST File Path

This parameter sets the path and filename of the LMHOST file.

Parameter

LMHOSTPath

Values

Path

Default

None


Primary WINS Server

This parameter sets the primary WINS name server.

Parameter

PrimaryWINS

Values

IP address (###.###.###.###)

Default

None


Secondary WINS Server

This parameter sets the secondary WINS name server.

Parameter

SecondaryWINS

Values

IP address (###.###.###.###)

Default

None


Scope ID

This parameter sets the scope ID.

Parameter

ScopeID

Values

String

Default

None


Subnet Mask

This parameter sets the IP subnet mask for TCP/IP if DHCP is not enabled.

Parameter

IPMask

Values

IP address (###.###.###.###)

Default

None


WINS

This parameter enables WINS for NetBIOS computer name resolution.

Parameter

WINS

Values

0 = Disable WINS
1 = Enable WINS resolution
DHCP = Enable WINS but get parameters from DHCP server

Default

1