Down-level Network Message ID Numbers

This table contains the messages that can be returned to a Windows NT Workstation or Windows NT Server system from an earlier operating system (such as Windows for Workgroups or LAN Manager), which is called, for convenience, a down-level system.

In Chapter 4, "Message Reference," the network messages are presented alphabetically and interspersed with the other system messages. In the following table, they have been arranged numerically. Missing or skipped numbers could be related to simple messages, such as "Password expires," that were not included in the printed version, or they may be in the Windows NT Workstation/Windows NT Server Network Message ID Numbers table, which is provided in the preceding section of this chapter.

ID

Message text

2103

The server could not be located.

2107

The device is not connected.

2117

The operation is invalid on a redirected resource.

2122

The Peer service supports only two simultaneous users.

2127

A remote API error occurred.

2131

An error occurred when opening or reading the configuration file.

2139

The requested information is not available.

2143

The event name is invalid.

2149

A line in the configuration file is too long.

2152

The printer destination cannot be found.

2153

The printer destination already exists.

2154

The printer queue already exists.

2155

No more printers can be added.

2156

No more print jobs can be added.

2157

No more printer destinations can be added.

2158

This printer destination is idle and cannot accept control operations.

2159

This printer destination request contains an invalid control function.

2160

The print processor is not responding.

2161

The spooler is not running.

2162

This operation cannot be performed on the print destination in its current state.

2163

This operation cannot be performed on the printer queue in its current state.

2164

This operation cannot be performed on the print job in its current state.

2165

A spooler memory allocation failure occurred.

2166

The device driver does not exist.

2167

The data type is not supported by the print processor.

2168

The print processor is not installed.

2181

The service table is full.

2183

The service does not respond to control actions.

2188

The configuration file contains an invalid service program name.

2190

The service ended abnormally.

2192

The service control dispatcher could not find the service name in the dispatch table.

2193

The service control dispatcher pipe read failed.

2200

This workstation is already logged on to the local-area network.

2201

The workstation is not logged on to the local-area network.

2204

The logon processor did not add the message alias.

2205

The logon processor did not add the message alias.

2206

The logoff processor did not delete the message alias.

2207

The logoff processor did not delete the message alias.

2209

Network logons are paused.

2210

A centralized logon-server conflict occurred.

2212

An error occurred while loading or running the logon script.

2214

The logon server was not specified. Your computer will be logged on as STANDALONE.

2215

The logon server could not be found.

2216

There is already a logon domain for this computer.

2217

The logon server could not validate the logon.

2225

The resource permission list already exists.

2228

There are too many names in the user accounts database.

2230

The limit of 64 entries per resource was exceeded.

2231

Deleting a user with a session is not allowed.

2232

The parent directory could not be located.

2235

This user is not cached in the user accounts database session cache.

2238

This user account is undefined.

2243

The password of this user cannot change.

2244

This password cannot be used now.

2248

No updates are necessary to this replicant network/local security database.

2252

This device is currently being shared.

2271

The Messenger service is already started.

2272

The Messenger service failed to start.

2275

This message alias has been added but is still forwarded.

2279

Messages cannot be forwarded back to the same workstation.

2284

The Messenger service has not been started.

2286

The forwarded message alias could not be found on the network.

2287

The message alias table on the remote station is full.

2288

Messages for this alias are not currently being forwarded.

2295

A write fault occurred.

2300

This operation is not supported on computers with multiple networks.

2314

There is not an open file with that identification number.

2315

A failure occurred when executing a remote administration command.

2316

A failure occurred when opening a remote temporary file.

2318

This device cannot be shared as both a spooled and a non-spooled resource.

2319

The information in the list of servers may be incorrect.

2320

The computer is not active in this domain.

2331

The operation is invalid for this device.

2332

This device cannot be shared.

2333

This device was not open.

2334

This device name list is invalid.

2335

The queue priority is invalid.

2337

There are no shared communication devices.

2338

The queue you specified does not exist.

2340

This list of devices is invalid.

2341

The requested device is invalid.

2342

This device is already in use by the spooler.

2343

This device is already in use as a communication device.

2354

The string and prefix specified are too long.

2356

This path component is invalid.

2370

Profile files cannot exceed 64K.

2371

The start offset is out of range.

2372

The system cannot delete current connections to network resources.

2373

The system was unable to parse the command line in this file.

2374

An error occurred while loading the profile file.

2375

Errors occurred while saving the profile file. The profile was partially saved.

2377

Log file filename is full.

2380

The source path cannot be a directory.

2381

The source path is illegal.

2382

The destination path is illegal.

2383

The source and destination paths are on different servers.

2385

The Run server you requested is paused.

2389

An error occurred when communicating with a Run server.

2391

An error occurred when starting a background process.

2392

The shared resource you are connected to could not be found.

2400

The LAN adapter number is invalid.

2402

Active connections still exist.

2405

The drive letter is in use locally.

2430

The specified client is already registered for the specified event.

2431

The alert table is full.

2433

The alert recipient is invalid.

2434

A user's session with this server has been deleted because the user's logon hours are no longer valid.

2440

The log file does not contain the requested record number.

2450

The user accounts database is not configured correctly.

2451

This operation is not permitted when the Netlogon service is running.

2452

This operation is not allowed on the last administrative account.

2454

Could not set logon information for this user.

2455

The Netlogon service has not been started.

2456

Unable to add to the user accounts database.

2458

A password mismatch has been detected.

2460

The server identification does not specify a valid server.

2461

The session identification does not specify a valid session.

2462

The connection identification does not specify a valid connection.

2463

There is no space for another entry in the table of available servers.

2464

The server has reached the maximum number of sessions it supports.

2465

The server has reached the maximum number of connections it supports.

2466

The server cannot open more files because it has reached its maximum number.

2467

There are no alternate servers registered on this server.

2480

The UPS driver could not be accessed by the UPS service.


ID

Message text (continued)

3000

Drive name is nearly full. Number bytes are available. Please warn users and delete unneeded files.

3001

Number errors were logged in the last number minutes. Please review the server's error log.

3002

Number network errors occurred in the last number minutes. Please review the server's error log. The server and/or network hardware may need service.

3003

There were number bad password attempts in the last number minutes. Please review the server's audit trail.

3004

There were number access-denied errors in the last number minutes. Please review the server's audit trail.

3006

The error log is full. No errors will be logged until the file is cleared or the limit is raised.

3007

The error log is 80% full.

3008

The audit log is full. No audit entries will be logged until the file is cleared or the limit is raised.

3009

The audit log is 80% full.

3010

An error occurred closing file filename. Please check the file to make sure it is not corrupted.

3011

The administrator has closed filename.

3012

There were number access-denied errors in the last number minutes.

3025

A defective sector on drive drive letter has been replaced (hotfixed). No data was lost. You should run CHKDSK soon to restore full performance and replenish the volume's spare sector pool. The hotfix occurred while processing a remote request.

3026

A disk error occurred on the HPFS volume in drive drive letter. The error occurred while processing a remote request.

3027

The user accounts database (NET.ACC) is corrupted. The local security system is replacing the corrupted NET.ACC with the backup made on date at time. Any updates made to the database after this time are lost.

3028

The user accounts database (NET.ACC) is missing. The local security system is restoring the backup database made on date at time. Any updates made to the database after this time are lost.

3029

Local security could not be started because the user accounts database (NET.ACC) was missing or corrupted, and no usable backup database was present. THE SYSTEM IS NOT SECURE.

3033

User user name has exceeded the account limitation text on server name.

3036

The replicator attempted to log on at computer name as user name and failed.

3046

Cannot log on. User is currently logged on and argument TRYUSER is set to NO.

3048

EXPORT path path cannot be found.

3050

Replicator failed to update signal file in directory name due to code system error.

3052

The required parameter was not provided on the command line or in the configuration file.

3053

LAN Manager does not recognize name as a valid option.

3055

A problem exists with the system configuration.

3058

The configuration file or the command line has an ambiguous option.

3059

The configuration file or the command line has a duplicate parameter.

3063

There is a conflict in the value or use of these options: name.

3075

Bad or missing LAN Manager root directory.

3076

The network software is not installed.

3077

The server is not started.

3078

The server cannot access the user accounts database (NET.ACC).

3079

Incompatible files are installed in the LANMAN tree.

3080

The LANMAN\LOGS directory is invalid.

3081

The domain specified could not be used.

3082

The computer name is being used as a message alias on another computer.

3083

The announcement of the server name failed.

3084

The user accounts database is not configured correctly.

3085

The server is not running with user-level security.

3087

The workstation is not configured properly.

3088

View your error log for details.

3089

Unable to write to this file.

3090

ADDPAK file is corrupted. Delete LANMAN\NETPROG\ADDPAK.SER and reapply all ADDPAKs.

3091

The LM386 server cannot be started because CACHE.EXE is not running.

3092

There is no account for this computer in the security database.

3093

This computer is not a member of the group SERVERS.

3094

The group SERVERS is not present in the local security database.

3098

The service failed to authenticate with the primary domain controller.

3099

There is a problem with the security database creation date or serial number.

3101

The system ran out of a resource controlled by the name option.

3102

The service failed to obtain a long-term lock on the segment for network control blocks (NCBs). The error code is the data.

3103

The service failed to release the long-term lock on the segment for network control blocks (NCBs). The error code is the data.

3104

There was an error stopping service name. The error code from NetServiceControl is the data.

3105

Initialization failed because of a system execution failure on path path. The system error code is the data.

3107

The network is not started.

3108

A DosDevIoctl or DosFsCtl to NETWKSTA.SYS failed. The data shown is in this format: DWORD approx CS:IP of call to ioctl or fsctl; WORD error code; WORD ioctl or fsctl number

3109

Unable to create or open system semaphore name. The error code is the data.

3110

Initialization failed because of an open/create error on the file filename. The system error code is the data.

3111

An unexpected NetBIOS error occurred. The error code is the data.

3114

Some entries in the error log were lost because of a buffer overflow.

3120

Initialization parameters controlling resource usage other than net buffers are sized so that too much memory is needed.

3121

The server cannot increase the size of a memory segment.

3122

Initialization failed because account file filename is either incorrect or not present.

3123

Initialization failed because network name was not started.

3124

The server failed to start. Either all three chdev parameters must be zero or all three must be nonzero.

3125

A remote API request was halted due to the following invalid description string: text.

3126

The network name ran out of network control blocks (NCBs). You may need to increase NCBs for this network. The following information includes the number of NCBs submitted by the server when this error occurred: text.

3127

The server cannot create the name mailslot needed to send the ReleaseMemory alert message. The error received is: code.

3128

The server failed to register for the ReleaseMemory alert, with recipient computer name. The error code from NetAlertStart is the data.

3129

The server cannot update the AT schedule file. The file is corrupted.

3130

The server encountered an error when calling NetIMakeLMFileName. The error code is the data.

3131

Initialization failed because of a system execution failure on path path. There is not enough memory to start the process. The system error code is the data.

3132

Longterm lock of the server buffers failed. Check the swap disk's free space and restart the system to start the server.

3141

The Message server has stopped due to a lock on the Message server shared data segment.

3150

A file system error occurred while opening or writing to the system message log file filename. Message logging has been switched off due to the error. The error code is the data.

3160

The workstation information segment is bigger than 64K. The size follows, in DWORD format: text.

3161

The workstation was unable to get the name-number of the computer.

3162

The workstation could not initialize the Async NetBIOS Thread. The error code is the data.

3163

The workstation could not open the initial shared segment. The error code is the data.

3164

The workstation host table is full.

3165

A bad mailslot server message block (SMB) was received. The SMB is the data.

3166

The workstation encountered an error while trying to start the user accounts database. The error code is the data.

3167

The workstation encountered an error while responding to an SSI revalidation request. The function code and the error codes are the data.

3171

There was an error expanding name as a group name. Try splitting the group into two or more smaller groups.

3174

The server could not read the AT schedule file.

3175

The server found an invalid AT schedule record.

3176

The server could not find an AT schedule file so it created one.

3177

The server could not access the name network with NetBiosOpen.

3178

The AT command processor could not run application.

3180

WARNING: Because of a lazy-write error, drive drive letter now contains some corrupted data. The cache is stopped.

3181

A defective sector on drive drive letter has been replaced (hotfixed). No data was lost. You should run CHKDSK soon to restore full performance and replenish the volume's spare sector pool. The hotfix occurred while processing a remote request.

3182

A disk error occurred on the HPFS volume in drive drive letter. The error occurred while processing a remote request.

3183

The user accounts database (NET.ACC) is corrupted. The local security system is replacing the corrupted NET.ACC with the backup made at date. Any updates made to the database after this time are lost.

3184

The user accounts database (NET.ACC) is missing. The local security system is restoring the backup database made at date. Any updates made to the database after this time are lost.

3185

Local security could not be started because the user accounts database (NET.ACC) was missing or corrupted, and no usable backup database was present. THE SYSTEM IS NOT SECURE.

3186

Local security could not be started because an error occurred during initialization. The error code returned is code. THE SYSTEM IS NOT SECURE.

3190

A NetWksta internal error has occurred: code.

3191

The redirector is out of a resource: name.

3192

A server message block (SMB) error occurred on the connection to name. The SMB header is the data.

3193

A virtual circuit error occurred on the session to name. The network control block (NCB) command and return code is the data.

3194

Hanging up a stuck session to name.

3195

A network control block (NCB) error occurred code. The NCB is the data.

3196

A write operation to filename failed. Data may have been lost.

3197

Reset of driver name failed to complete the network control block (NCB). The NCB is the data.

3198

The amount of resource name requested was more than the maximum. The maximum amount was allocated.

3204

The server could not create a thread. The THREADS parameter in the CONFIG.SYS file should be increased.

3205

The server could not close filename. The file is probably corrupted.

3211

The replicator attempted to log on at computer name as user name and failed.

3213

Replicator limit for files in a directory has been exceeded.

3214

Replicator limit for tree depth has been exceeded.

3217

Cannot log on. User is currently logged on and argument TRYUSER is set to NO.

3219

EXPORT path path cannot be found.

3220

Replicator failed to update the signal file in directory name due to code system error.

3221

Disk Fault Tolerance Error code.

3225

An error occurred while updating the logon or logoff information for user name.

3233

The UPS driver could not be opened. The error code is the data.

3250

Initialization failed because of an invalid or missing parameter in the configuration file filename.

3251

Initialization failed because of an invalid line in the configuration file filename. The invalid line is the data.

3252

Initialization failed because of an error in the configuration file filename.

3253

The file filename has been changed after initialization. The boot-block loading was temporarily terminated.

3254

The files do not fit to the boot-block configuration file filename. Change the BASE and ORG definitions or the order of the files.

3255

Initialization failed because the dynamic-link library name returned an incorrect version number.

3256

There was an unrecoverable error in the dynamic-link library of the service.

3258

The fault-tolerance error log file, LANROOT\LOGS\FT.LOG, is more than 64K.

3259

The fault-tolerance error log file, LANROOT\LOGS \FT.LOG, had the update in progress bit set upon opening, which means that the system crashed while working on the error log.

3304

A network error occurred.

3400

There is not enough memory to start the Workstation service.

3401

An error occurred when reading the NETWORKS entry in the LANMAN.INI file.

3402

This is an invalid argument: name.

3403

The text NETWORKS entry in the LANMAN.INI file has a syntax error and will be ignored.

3404

There are too many NETWORKS entries in the LANMAN.INI file.

3406

An error occurred when opening network device driver name = name.

3407

Device driver name sent a bad BiosLinkage response.

3409

The redirector is already installed.

3411

There was an error installing NETWKSTA.SYS. Press ENTER to continue.

3412

Resolver linkage problem.


ID

Message text (continued)

3512

The software requires a newer version of the operating system.

3526

The workstation has open files.

3535

An error occurred controlling the device.

3675

The session from computer name has open files.

3677

New connections will not be remembered.

3678

An error occurred while saving your profile. The state of your remembered connections has not changed.

3680

An error occurred while restoring the connection to name.

3694

The shared queue cannot be deleted while a print job is being spooled to the queue.

3714

This operation is privileged on systems with earlier versions of the software.

3717

The log file has been corrupted.

3718

Program filenames must end with .EXE.

3720

A bad value is in the units-per-week field of the user record.

3758

The destination list provided does not match the destination list of the printer queue.

3759

Your password cannot be changed until date.

3803

The LANMAN root directory is unavailable.

3804

The SCHED.LOG file could not be opened.

3807

The AT schedule file is corrupted.

3808

The delete failed due to a problem with the AT schedule file.

3810

The AT schedule file could not be updated because the disk is full.

3812

The AT schedule file is invalid. Please delete the file and create a new one.

5170

The workstation must be started with the Net Start command.

5281

Drive letter has a remembered connection to name. Do you want to overwrite the remembered connection? path

5301

Illegal network control block (NCB) buffer length on SEND DATAGRAM, SEND BROADCAST, ADAPTER STATUS, or SESSION STATUS. The NCB is the data.

5302

The data descriptor array specified in the network control block (NCB) is invalid. The NCB is the data.

5303

The command specified in the network control block (NCB) is illegal. The NCB is the data.

5304

The message correlator specified in the network control block (NCB) is invalid. The NCB is the data.

5306

An incomplete network control block (NCB) message was received. The NCB is the data.

5307

The buffer address specified in the network control block (NCB) is illegal. The NCB is the data.

5308

The session number specified in the network control block (NCB) is not active. The NCB is the data.

5310

The session specified in the network control block (NCB) was closed. The NCB is the data.

5311

The network control block (NCB) command was canceled. The NCB is the data.

5312

The message segment specified in the network control block (NCB) is illogical. The NCB is the data.

5313

The name already exists in the local adapter name table. The network control block (NCB) request was refused. The NCB is the data.

5314

The network adapter name table is full. The network control block (NCB) request was refused. The NCB is the data.

5315

The network name has active sessions and is now de-registered. The network control block (NCB) command completed. The NCB is the data.

5316

A previously issued Receive Lookahead command is active for this session. The network control block (NCB) command was rejected. The NCB is the data.

5318

A network control block (NCB) session open was rejected. No LISTEN is outstanding on the remote computer. The NCB is the data.

5319

The name number specified in the network control block (NCB) is illegal. The NCB is the data.

5320

The call name specified in the network control block (NCB) cannot be found or did not answer. The NCB is the data.

5321

The name specified in the network control block (NCB) was not found. Cannot put '*' or 00h in the NCB name. The NCB is the data.

5322

The name specified in the network control block (NCB) is in use on a remote adapter. The NCB is the data.

5323

The name specified in the network control block (NCB) has been deleted. The NCB is the data.

5324

The session specified in the network control block (NCB) ended abnormally. The NCB is the data.

5325

The network protocol has detected two or more identical names on the network. The network control block (NCB) is the data.

5326

An unexpected protocol packet was received. There may be an incompatible remote device. The network control block (NCB) is the data.

5333

The NetBIOS interface is busy. The network control block (NCB) request was refused. The NCB is the data.

5335

The adapter number specified in the network control block (NCB) is illegal. The NCB is the data.

5336

The network control block (NCB) command completed while a cancel was occurring. The NCB is the data.

5337

The name specified in the network control block (NCB) is reserved. The NCB is the data.

5338

The network control block (NCB) command is not valid to cancel. The NCB is the data.

5351

There are multiple network control block (NCB) requests for the same session. The NCB request was refused. The NCB is the data.

5352

There has been a network adapter error. The only NetBIOS command that may be issued is an NCB RESET. The network control block (NCB) is the data.

5354

The maximum number of applications was exceeded. The network control block (NCB) request was refused. The NCB is the data.

5356

The requested resources are not available. The network control block (NCB) request was refused. The NCB is the data.

5364

A system error has occurred. The network control block (NCB) request was refused. The NCB is the data.

5365

A ROM checksum failure has occurred. The network control block (NCB) request was refused. The NCB is the data.

5366

A RAM test failure has occurred. The network control block (NCB) request was refused. The NCB is the data.

5367

A digital loopback failure has occurred. The network control block (NCB) request was refused. The NCB is the data.

5368

An analog loopback failure has occurred. The network control block (NCB) request was refused. The NCB is the data.

5369

An interface failure has occurred. The network control block (NCB) request was refused. The NCB is the data.

5370

An unrecognized network control block (NCB) return code was received. The NCB is the data.

5380

A network adapter malfunction has occurred. The network control block (NCB) request was refused. The NCB is the data.

5381

The network control block (NCB) command is still pending. The NCB is the data.

5500

The update log on name is over 80% capacity. The primary domain controller name is not retrieving the updates.

5501

The update log on name is full, and no further updates can be added until the primary domain controller name retrieves the updates.

5502

The time difference with the primary domain controller name exceeds the maximum allowed skew of number seconds.

5503

The account of user user name has been locked out on name due to number bad password attempts.

5504

The filename log file cannot be opened.

5505

The filename log file is corrupted and will be cleared.

5506

The Application log file could not be opened. Filename will be used as the default log file.

5507

The filename log file is full.

5600

Could not share the User or Script path.

5713

The full synchronization request from the server name completed successfully. Number object(s) has (have) been returned to the caller.

5714

The full synchronization request from the server name failed.