IDirectSound3DBuffer::SetConeOrientation

The IDirectSound3DBuffer::SetConeOrientation method sets the orientation of the sound projection cone for this sound buffer. This method has no effect unless the cone angle and cone volume factor have also been set.

HRESULT SetConeOrientation(
  D3DVALUE x,    
  D3DVALUE y,    
  D3DVALUE z,    
  DWORD dwApply  
);

Parameters

x, y, and z

Values whose types are D3DVALUE and that represent the coordinates of the new sound cone orientation vector.

dwApply

Value indicating when the setting should be applied. This value must be one of the following:

DS3D_DEFERRED

Settings are not applied until the application calls the IDirectSound3DListener::CommitDeferredSettings method. This allows the application to change several settings and generate a single recalculation.

DS3D_IMMEDIATE

Settings are applied immediately, causing the system to recalculate the 3-D coordinates for all 3-D sound buffers.

Return Values

If the method succeeds, the return value is DS_OK.

If the method fails, the return value may be DSERR_INVALIDPARAM.

Requirements

  Windows NT/2000: Requires Windows 2000.
  Windows 95/98: Requires Windows 95 or later. Available as a redistributable for Windows 95.
  Header: Declared in dsound.h.
  Import Library: Use dsound.lib.

See Also

IDirectSound3DBuffer::SetConeAngles, IDirectSound3DBuffer::SetConeOutsideVolume