Internet Information Server Returns IP Address in HTTP Header (Content-Location)

ID: Q218180

The information in this article applies to:
  • Microsoft Internet Information Server version 4.0

SYMPTOMS

When you use static HTML pages (for example, Default.htm), a Content-Location header is added to the response. By default, in Internet Information Server (IIS) 4.0, the Content-Location references the IP address of the server rather than the Fully Qualified Domain Name (FQDN) or Hostname.

This header may expose internal IP addresses that are usually hidden or masked behind a Network Address Translation (NAT) Firewall or proxy server.

Example:

HTTP/1.1 200 OK
Server: Microsoft-IIS/4.0
Content-Location: http://10.1.1.1/Default.htm
Date: Thu, 18 Feb 1999 14:03:52 GMT
Content-Type: text/html
Accept-Ranges: bytes
Last-Modified: Wed, 06 Jan 1999 18:56:06 GMT
ETag: "067d136a639be1:15b6"
Content-Length: 4325
In this example, the Content-Location specifies the private internal address of the IIS computer within the header. This header is then unchanged when it passes through a firewall or proxy server. Therefore, the security of the internal network may be compromised by exposing the network addresses that are being used.


RESOLUTION

There is a value that can be modified in the IIS metabase to change the default behavior from exposing IP addresses to send the FQDN instead. This allows the IP address to be masked by the domain name.

Example:

HTTP/1.1 200 OK
Server: Microsoft-IIS/4.0
Content-Location: http://www.domain.com/Default.htm
Date: Thu, 18 Feb 1999 15:08:44 GMT
Content-Type: text/html
Accept-Ranges: bytes
Last-Modified: Mon, 30 Nov 1998 15:40:15 GMT
ETag: "f07f84b9771cbe1:3068"
Content-Length: 4739
WARNING: Using Adsutil.vbs incorrectly can cause serious problems that may require you to reinstall Internet Information Server 4.0. Microsoft cannot guarantee that problems resulting from the incorrect use of Adsutil.vbs can be solved. Use Adsutil.vbs at your own risk.

To set the value, do the following:
  1. Open a command window (cmd).


  2. Go to cd winnt\system32\inetsrv\adminsamples (this may vary depending on your installation of Internet Information Server)


  3. Type the following syntax:
    adsutil set w3svc/UseHostName True
    By default, this value is set to False, so it returns only the IP address of the IIS computer. Setting this value to True returns the Fully Qualified Domain Name (FQDN) for the IIS computer.



WORKAROUND

Another way to work around this issue is to use Active Server Pages instead of static html pages (.htm or .html) and create a custom header that sends back a specific Content-Location. The Active Server Pages (ASP) engine does not return a Content-Location when the response is built, so the ability to add a custom one is there.

To implement this workaround, follow these steps:

  1. Rename all static pages (for example, htm or html) to .asp. This will force the pages through the ASP engine.


  2. Start the Internet Service Manager (ISM) to load the IIS snap-in for the Microsoft Management Console (MMC).


  3. Click the plus sign (+) next to Internet Information Server to expand it.


  4. Click the plus sign (+) next to ServerName.


  5. Right-click Default Web Site, and then click Properties.


  6. Click the HTTP Headers tab.


  7. In the Custom HTTP Headers section, click Add.


  8. Type "Content Location" (without the quotation marks) in the Custom Header Name.


  9. Type "http://www.domain.com/" (example only) (without the quotation marks) in Custom Header Value


  10. Click OK twice.


Additional query words: IIS Content-Location Header HTTP adsutil.vbs

Keywords :
Version : winnt:4.0
Platform : winnt
Issue type : kbprb


Last Reviewed: February 24, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.