Err Msg: HTTP Error 403, 403.4, 403.5 Forbidden: SSL Required

ID: Q224389

The information in this article applies to:

Microsoft Internet Information Server version 4.0

SYMPTOMS

After you enable the Require Secure Channel when accessing this resource option or the Require 128-bit Encryption option from the IIS HTML Admin (HTMLA), the following error occurs when trying to access the Web site:

HTTP Error 403
403.4 Forbidden: SSL required
This error indicates that the page you are trying to access is secured with Secure Sockets Layer (SSL). In order to view it, you need to enable SSL by typing "https://" at the beginning of the address you are attempting to reach.
Please contact the Web server's administrator if the problem persists.

CAUSE

The HTML Admin (HTMLA) incorrectly allows you to enable Require Secure Channel when accessing this resource and Require 128-bit Encryption before an SSL certificate has been mapped to the Web site. The MMC does not allow you to enable either of these options until an SSL certificate has been assigned to the Web site using Key Manager.

RESOLUTION

To resolve this problem, assign an SSL certificate to the Web site using the MMC.

WORKAROUND

If you do not have an SSL certificate to assign to the Web site, use the Cscript utility to disable these options.

Open a CMD prompt: Click Start, click Run, and then type "cmd.exe" (without quotation marks) and press the Enter key.

Change to the Adminsamples directory by typing "CD \winnt\system32\inetsrv\adminsamples" (without the quotation marks), and then press the Enter key. Note: Capitalization does not matter.

Type "cscript adsutil.vbs set w3svc/1/root/AccessSSL false" (without quotation marks), and then press the Enter key. Again, capitalization does not matter.

Type "cscript adsutil.vbs set w3svc/1/root/AccessSSL128 false" (without quotation marks), and then press the Enter key. Capitalization does not matter.

Close the CMD window.

Close all browsers.

You should now be able to access the Web site

If you are still unable to access the Web site without receiving the "HTTP Error 403" error, then it is possible that SSL is enabled at a higher level in the metabase hierarchy. Repeat steps 1 through 7, but execute the following Cscript commands instead:

cscript adsutil.vbs set w3svc/1/AccessSSL false
cscript adsutil.vbs set w3svc/1/AccessSSL128 false
cscript adsutil.vbs set w3svc/AccessSSL false
cscript adsutil.vbs set w3svc/AccessSSL128 false

If you are still unable to access the Web site without receiving the "HTTP Error 403" error, it is possible that SSL is enabled on a different Web site instance other than the first instance. Repeat steps 1 through 7, but execute the Cscript command with the appropriate Web site instance number. For example, if SSL is enabled on the third Web site instance, the following Cscript commands will disable SSL:

cscript adsutil.vbs set w3svc/3/AccessSSL false
cscript adsutil.vbs set w3svc/3/AccessSSL128 false

If the above steps do not disable SSL, then please contact Microsoft Technical Support for assistance.

MORE INFORMATION

Additional query words:

Keywords :
Version : winnt:4.0
Platform : winnt
Issue type : kbprb