SMS: Troubleshooting Inventory Collection Problems

• Microsoft Systems Management Server versions 1.0, 1.1

SUMMARY

This article describes several Systems Management Server inventory collection problems, and what you can do to resolve them.

MORE INFORMATION

The Client Stops Responding When You Run Inventory Agent

1. See if you have a Smssafe.tmp file. This file lists each test that was run. The last test listed indicates which test caused the client to stop responding. Inventory Agent deletes this file if it completes normally.
   
   NOTE: If you are running Systems Management Server 1.1, the Smssafe.tmp file is located in the Ms\Sms\Data directory.



2. Set the SMSLS=1 environment variable. This variable enables the Smsls.bat file's verbose mode, to help you determine where the Inventory Agent caused the client to stop responding. verbose mode echoes all output to the screen.



3. Once you determine where the Inventory Agent is stopping, remove or reconfigure the suspect component and run the inventory again. Once the problem has been narrowed down to a particular configuration, report the results to Microsoft Technical Support.

You Run Inventory Agent on a New Client but the Inventory Doesn't Appear in the Database

1. Look at the CurrentLogonServer entry in the hidden Sms.ini file, to determine what logon server Systems Management Server is reporting the inventory to.



2. For MS-DOS, Windows, Windows for Workgroups, and Windows NT clients, check the \\<logon server>\Sms_Shr\Inventry.box directory for a .raw file generated by the client. For Macintosh and OS/2 clients, check the \\<logon server>\Sms_Shr\Isvmif.box directory for a .mif file. If multiple files exist, look for one with a recent time stamp. Display the text contents of the file, and look for a Systems Management Server ID that matches the Systems Management Server Unique ID entry in the Sms.ini file. Confirm that the Inventory Agent did write this file.
   
   NOTE: The .raw file has a binary header and a text detail area. The .mif file is a text file. A first-time .mif file is about 40-60K in size. Delta .mif files are usually less than 5K in size.



3. If the .raw or .mif file does not exist, check for a permission or connection problem. The client's Inventory Agent may not be able to connect and write to this location.
   
   If this file does exist, then Inventory Agent is working properly. See the next section to determine if one of the Systems Management Server Site services is suspect.

Inventory Agent Runs Normally on the Client but the Hardware Inventory Is Not Updated

1. Confirm that the hardware inventory collection interval has expired for the client. Check the current LastHardwareScan value in the Sms.ini file, add the inventory collection interval configured for the Systems Management Server site, and compare the resulting date against the client's current system clock date. Systems Management Server uses this procedure to determine when it needs to collect hardware or software inventory.
   
   For more information on the inventory process, see Appendix C of the "Systems Management Server Administrator's Guide version 1.1" or chapter 3 of the "Systems Management Server Resource Guide."



2. The Systems Management Server Maintenance Manager service is responsible for collecting the .raw and .mif files from the logon servers, and transferring them to the Systems Management Server Site server. These files are placed in the \Sms\Site.srv\Inventry.box or Isvmif.box directory, depending on the client type. If the files do not arrive during the Maintenance Manager watchdog cycle, check the Sms\Logs\Maintman.log file for errors that occurred while either attempting to connect to the logon server or transferring files to the site server.



3. After these files reach the site server, the Systems Management Server Inventory Data Processor service processes them and places the output in the Sms\Site.srv\Dataload.box\Deltamif.col directory. If the files are not removed from the source directories, or do not appear in the destination directory, check the Sms\Logs\Invproc.log file for errors.



4. After the output is written to the ...\Deltamif.col directory, the Systems Management Server Inventory Data Loader copies the data in these files to the SQL database. If the files are not removed from this directory, or the data does not appear in the SQL database, check the Sms\Logs\Datalodr.log file for errors.



5. Use the Systems Management Server Services Manager to stop the services while you troubleshoot this problem. After you examine a file at one point in the process, start the service that will process that file. This allows you (the administrator) time to look at the file before it is deleted, and the results are sent to the next point in the system.



6. Log file entries report both the Systems Management Server event ID and the Windows NT error code. Convert the Windows NT error code to text, using Error32, to determine what the actual error is.
   
   Error32 can be copied from the Psstools directory on the Systems Management Server compact disc.

Inventory in the Database Is Corrupt or Incorrect

1. Run Inventory Agent on the client and check the .raw or .mif file (at the locations mentioned above) generated by the client. Compare the inventory reported with the known configuration of the client. If the .raw or .mif file is correct on the logon server, check the file again after it is moved to the site server, and once again after the Systems Management Server Inventory Processor has created the delta .mif in the ...\Deltamif.col directory.



2. If corruption occurs in the .raw or .mif file on the logon server, it is usually caused by the Inventory Agent. If this happens, enable the Inventory Agent verbose mode, and watch the output, to determine where the problem occurs.



3. If the .raw or .mif files on the Systems Management Server Site server are corrupted, check the associated service log files for error or warning messages. These messages may indicate network or file system problems that are causing the corruption. The Systems Management Server Data Loader service does not usually parse the .mif file or put the file in the Datalodr.box\badmifs directory for the administrator to review.

Software Inventory Is Not Collected or Updated

1. Confirm that the software inventory collection interval has expired. Use the same procedure as above ("Inventory Agent Runs Normally on the Client but the Hardware Inventory Is Not Updated," step one), but use the value in LastSoftwareScan to confirm the software collection interval.



2. Confirm that a compiled software package rules file (Pkg_16.cfg) exists on the logon servers. This file specifies what software inventory is supposed to be collected from the Systems Management Server client by Inventory Agent. Check Appendix C of the "Systems Management Server Administrator's Guide" for details on how Pkg_16.cfg is created and placed on the logon servers.



3. Check the Package.rul file and confirm that it has the proper software package rules. This file is compiled to create the Pkg_16.cfg file. Refer to Appendix C for the location.



4. Check the resulting .raw or .mif file created by the Inventory Agent. Software inventory and collected files are appended to the end of the hardware inventory section.



5. Carefully check your Software Package inventory rule properties (created using Systems Management Server Administrator). Many software inventory problems occur due to a bad rules configuration.

Machine Inventory Appears to Change and Contains Entries from Another System

Additional query words:

Keywords : nthowto smsadmin smsinv smshowto smsmaintman
Version : winnt:1.0,1.1
Platform : winnt
Issue type :